Boss Audio Systems MR1600S Detaching the front panel, Be careful when handling the front panel

Detaching the front panel

1.Press the RELEASE button to lower the front panel. (Figure 5).

RELEASE button

Figure 5 Press RELEASE to release the front panel

2.Press the panel release latch on the front edge of the lower surface of faceplate, and at the same time pull the panel forward to disengage it from the main unit. (Figure 6).

Figure 6 Press release latch on on the lower surface of the front edge of the panel and pull the panel until it is free of the head unit.

3.Push the panel mechanism back into the housing so it is not protruding. To do so, push the BOTTOM EDGE down straight into the unit – do not lift it! (Figure 7).

PUSH HERE in this direction

Figure 7 Push the panel mechanism back in

4.Immediately place the front panel in its protective case for safe and clean storage (Figure 8).

Front Panel

Figure 8 Place the front panel in its protective case

Be careful when handling the front panel!

1.Do not drop front panel.

2.When detaching or reinstalling, do not put pressure on the display.

3.Do not touch the contacts on the panel or the main unit body – doing so may result in poor electrical contact.

4.Dirt or foreign substances can be removed with a clean, dry cloth.

5.Do not expose the panel to high temperaturees or direct sunlight.

6.Do not permit volatile agents or solvents to contact the front panel.

7.Do not attempt to disassemble the front panel.

MR1600W • MR1600S User’s Manual - page 4