Boss Audio Systems BV6450 manual Unit Installation, Installation Instructions

3.During JPEG playback, press one of the >/</^/v buttons to change the angle of viewing picture that is displaying as follows:

>: 90 deg cw; <: 90deg ccw; ^:UP<-->DOWN; v: LEFT<-->RIGHT

During JPEG playback, press the PROG button to change the mode of refresh picture. During JPEG playback, press the STOP button to stop playing and return to the root

menu.

*During JPEG playback, the following buttons are not available: SLOW-FWD, MENU, SUBTITLE, TITLE, ANGLE, STEP, AUDIO, RDM, INT and A-B.

*In JPEG mode,the other operations are same as ones in MP3/WMA mode.

5.16 MP4 Operation

1.The root menu is displayed on TV when beginning to switch on DISC mode, then it will automatically play the first file.

During playback, press the STOP button to stop playing and return to the root menu.

2.When displaying the root menu, press the direction buttons to select your desired FOLDER or file, then press the OK or PLAY button to open the FOLDER, or play the selected file.

When displaying the root menu, you can also use the number buttons to select the

serial number of the file and play the file.

*The ANGLE, PROG, RDM, INT , MENU, SUBTITLE and TITLE/PBC buttons are not valid.

*The other functions are same as ones in DVD disc; but the RPT function is same as one in MP3/WMA.

5.17 ESP and ID3 Function

There is ESP function for all formats of discs.

In MP3/WMA mode, during playback, the information of the folder, file, song, artist and album will be scrolling on the LCD display. As long as the current playing MP3 music contains relevant ID3 tag information in version 1.0/2.0 format, the 3 items underlined above will be scrolling on the LCD display; otherwise, they will not.

5.18 USB and MMC/SD Reader Operation

Power on the DVD player, then insert the USB storage or MMC/SD Card(firstly flip down the front panel), and then the monitor will display the root menu of the USB storage or MMC/SD Card.

All the operations are same as ones of the corresponding format. When you want to pull out the Card, firstly push it, and then pull it out.

5.19 The DVD System Menu Setup Operation

1.Press the SETUP button on the remote controller to access the DVD System Menu on the monitor.

2.There are 6 setup pages in all for the System Menu. Press the > or < button to select an desired setup page.

3.Press the ^ or v button to select an setup item in the selected setup page.

4.Press the > button to enter the setup item. Then press the v or ^ button to select a desired mode of the setup item, finally press the OK button to confirm it.

*Press the < button to return to the upper level.

*Press the SETUP button again to exit the System Menu.

1.9 UNIT INSTALLATION

INSTALLATION INSTRUCTIONS

THE UNIT INSTALLATION IS ANTI-THEFT ONE. THE UNIT

CHASSIS WEARS A SLIDING METAL HOUSING. FIRSTLY

CONNECT THE POWER LINES, SPEAKER LINESAND

AUTO ANTENNAACCORDING TO MANUAL REQUIREMENT,

THEN INSTALL THE SLIDING METAL HOUSING IN A CAR

ACCORDING TO THE DIAGRAM.

		TO BOOST UP THE CAPABILITY OF
		ANTI-JAMMING, PLEASE FIX THE
		METAL STRAP ON THE METAL
METAL STRAP		CONNECTED TO THE CHASSIS OF
		THE CAR.
				SELECT THE PROPER TABS
				OF THE SLIDING METAL
				HOUSING TO FIX THE
				SLIDING METAL HOUSING.
			UNIT CHASSIS
	DASH BOARD			PLASTIC TRIM OUT
	SLIDING METAL HOUSIN G			FRONT PANEL

TO DRAW THE CHASSIS OUT OF THE

SLIDING METAL HOUSING, INSERT

THE LEFT AND RIGHT KEY PLATES

INTO THE TWO SIDES OF CHASSIS.

NOTE

REMOVE THE DECK TRANSPORT

SCREWS BEFORE INSTALLING IT.

REMOVE THE SLIDING METAL HOUSING

EJECT BUTTON

RESET BUTTON