INSTRUCTIONS
5.BASIC OPERATION
1. SOURCE ON/OFF
Press SRC button on panel or SOURCE button on remote control quickly to power on. Press SRC button on panel or SOURCE button on remote control longer to power off.
2. PLAYING SOURCE CHOOSE
Press SOURCE button on remote control, unit will switch sources in the following sequence: RADIO → DVD → AUX
3. MUTE CONTROL
Press MUTE button on panel or MUTE button on remote control shortly to turn off sound output, press again to back to sound output.
4. VOLUME ADJUSTMENT
1)Press VOL+/VOL- button on panel, VOL+/VOL- button on remote control or touch button on display to adjust volume level.
2)The volume setting on this unit is 0 - 39.
BASS, TREBLE, BALANCE & FADER ADJUSTING (SELECT)
Press SEL button on remote control to choose your desired Bass, Treble, Balance & Fader level:
VOL 
BAS 
TRE 
L/R
F/R
NOTE:
1)DVD playing mode, MBP & User will be automatically activated.
2)After 5 seconds you choose desired mode, do not adjust volume button. The mode will automatically take you back to status before adjustment.
5. RESET
1)If unit is not working correctly, you should press the RES button. This will reset the radio and should start working correctly afterwards.
2)After reset, all settings will resume back to the factory default settings.
25.SPECIFICATIONS:
Power supply
Power range
Max operate current
Dimensions
Ground system
Amp Rating
FM tuner
European frequency range USA frequency range Signal/Noisse ratio Stereo separation Search station volt Distortion rate
AM tuner
European frequency range USA frequency range Limit noise sensitivity
DVD PLAYER
Signal/Noise ratio
Frequency response
INSTRUCTIONS
DC 12V
80 Watts x 4 Channels
1.5%
70dB