Boss Audio Systems BV9967BI Dual front and rearAUX Dual front and rearUSB 16. IR, 18. SD, Reset

INSTRUCTIONS

Step 4: Press“ ” button in the remote and then quickly press “ ” button as show in picture (5) and you will enter the touch calibration interface as show in picture (6).

picture (7).

INSTRUCTIONS

11. Number Button 4 /

In radio mode, press this button to hear radio preset;

In disc playback mode, press this button for to stop playback.

12. Number Button 5 /

In playback mode, press the button to adjust the angle of screen.

13. Number Button 6 /

In playback mode, press the button to adjust the angle of screen.

14. Dual (front and rear)AUX

Warning :You can only use either front or rear AUX at a time. Never connect both front and rear AUX at the same time!

15. Dual (front and rear)USB

Warning :You can only use either front or rear USB at a time.Never connect both front and rear USB at the same time! This could cause malfunctions.

16. IR

To receive infrared signal from the remote controll.

17.

When there is a disc in the unit, press the button to eject the disc.

18. SD

Insert SD/MMC card, the unit will play the files automatically.

19. RESET

If the unit or its connected device dose not work normally, use prong object to press the button.

After the unit restart, the setup returns to its previous status.

15 04