Blaupunkt Acapulco MP54 US, Casablanca MP54 US Selecting the waveband / memory bank, Seek tuning

Selecting the waveband / memory bank

Selecting the waveband / memory bank You can use this device to receive pro- grammes broadcast over the FM and AM wavebands. There are three mem- ory banks (FM1, FM2 and FMT) for the FM waveband and two memory banks (AM and AMT) for the AM waveband.

Six stations can be stored in each mem- ory bank.

To switch between the FM1, FM2 and FMT memory banks,

➮briefly press the FM•TS button 4.

To switch between the AM and AMT memory banks,

➮briefly press the AM button =.

Tuning into a station

There are various ways of tuning into a station.

Automatic station seek tuning

➮Press the or button 7.

The radio tunes into the next receiva- ble station.

Tuning into stations manually

You can also tune into stations manual- ly.

Note:

●You can only tune into stations manually if the RDS function is de- activated.

➮ Press the or button 7.

RADIO MODE

Setting the sensitivity of station	DEUTSCH
seek tuning
You can choose whether the radio
should only tune into stations providing
good reception or whether it can also	ENGLISH
tune into those with a weak reception.
➮ Press the MENU button 9.
“TUNER MENU” appears in the display.
➮ Press the OK button : to display	FRANÇAIS
➮ Press the or button 7 repeat-
the tuner menu.
edly until “SENS” appears in the
display.	ITALIANO
The display shows the currently set sen-
sitivity level. “SENS HI3” means that the
tuner is set to the highest sensitivity
setting. “SENS LO1” means it is set to	NEDERLANDS
the lowest sensitivity setting.
➮ Set the sensitivity level that you
want using the buttons 7.
When you have finished making your	SVENSKA
changes,
➮ press the MENU button 9.
Note:
● You can set different sensitivity lev-	ESPAÑOL
els for FM and AM.
	PORTUGUÊS
	DANSK

13