Blaupunkt Toronto RDM 128 Recalling stored stations, Scanning stored stations with Preset Scan

Automatically storing the strongest stations with Travelstore

You can automatically store the six most powerful FM stations of your current recep- tion area sorted according to their signal strength. This function is particularly con- venient on longer trips.

•Press the FMT button for two seconds. “T-STORE” will appear in the display.

The six strongest FM stations will be auto- matically stored on the memory bank “T” (Travelstore). When this process has been completed, the radio will play the first sta- tion.

If desired, stations can also be stored man- ually on the Travelstore bank (see “Storing stations”).

Recalling stored stations

You can recall any stored station at the touch of a button.

•Select the waveband by pressing FMT or M•L. On FM, also choose the corre- sponding memory bank by pressing the FMT button as many times until the desired bank appears in the display.

•Press the corresponding preset button briefly to recall the station.

Scanning stored stations with Preset Scan

You can have all of the stored stations briefly scanned on all wavebands.

To start Preset Scan:

•Press SC/MIX for approximately two seconds.

All of the stored stations of the adjusted waveband will be scanned one after the oth- er. The memory bank and preset position of the currently scanned station will flash in the display.

To select a scanned station and switch off Preset Scan:

•Press SC/MIX briefly.

Scanning stations with

Radio-Scan

You can also scan all stations which can be received.

To start the Scan function:

•Press SC/MIX briefly.

The scanned frequency or the station name will start flashing in the display. During the actual scanning process “SCAN” will be dis- played.

To select a scanned station and switch off the Radio-Scan function:

•Press SC/MIX briefly.

If no station is selected, the scan function will be automatically switched off after the frequency band has been run through com- pletely. The unit will tune in the station lis- tened to before starting the scan.

Changing the scan time

The scan time can be changed from be- tween five to a maximum of 30 seconds. Please refer to chapter “DSC programming - SCANTIME”.

Selecting the seek tuning sensi- tivity

You can alter the automatic seek tuning sensitivity.

If “lo” is displayed, the radio will only pick up strong, local stations (low sensitivity).

If “lo” does not light up, the radio will also pick up weaker, distant stations (high sen- sitivity).

The sensitivity level can be altered in both modes (see also chapter “DSC program- ming”).

42