Blaupunkt C51 Switching the Radio Monitor On / off, Skipping Blank Tape, Selecting Tape Type

Play is interrupted and “PAUSE” appears in the display.

➮Press button 3 >again to re- sume play.

Switching the Radio Monitor On / off

Note:

●The radiomonitor can only be set if a cassette is being played.

➮Press the MENU button 8.

➮Press the or button : until “RM ON” or “RM OFF” appears in the display.

➮Press the or button :to switch the radio monitor on or off.

➮Press the MENU button 8or OK

;.

Skipping Blank Tape

You can automatically skip sections of blank tape that last longer than 10 sec- onds. This requires the blank skip func- tion to be activated.

Note:

●The blank skip can only be set if a cassette is being played.

Switching Blank Skip On / Off

➮Press the MENU button 8.

➮Press the or button : until “BLANK SKIP” appears in the dis- play.

CASSETTE MODE

➮ Press the or button : to

switch the blank skip function on or	ENGLISH
off.
➮ Press the MENU button 8or OK
;twice.

Selecting Tape Type
If you are playing a “Metal” or “CrO” FRANÇAIS
2
tape, you should set the tape type se-
lector to “MTL ON”.	ESPAÑOL
To select the tape type
➮ Press button 1 MTL >.

Either “MTL ON” or “MTL OFF” will ap-

pear briefly in the display. PORTUGUÊS

Dolby* B Noise Reduction

You should switch on the Dolby func- tion whenever you play tapes recorded using the Dolby B process.

➮ Press button 6 >.

When the Dolby function is switched on, shows in the display.

*Noise reduction system manufactured un- der licence from Dolby Laboratories. The word Dolby and the double-D symbol are trademarks of Dolby Laboratories.

15