CASSETTE MODE
Repeating tracks
➮Press button 3 (RPT) =.
The current track is repeated. RPT ap- pears in the display. When the end of the track is reached and the tape is re- winding, “RPT TRCK” appears in the display.
To stop repeating the track,
➮press button 3 (RPT) = again.
Normal playback is then continued. RPT disappears from the display.
Scanning all the tracks on a cassette (SCAN)
➮Press the SCAN button 4.
“CAS SCAN” appears in the display. All the tracks on the cassette are briefly played in ascending order.
To stop scanning,
➮Press the SCAN button 4again.
The current track will then continue to be played.
Note:
●You can set the scanning time. For further details, read the section en- titled “Setting the scantime” in the “Radio mode” chapter.
●In order for the
Pausing playback (PAUSE)
To pause the cassette whilst it is play- ing,
➮press button 2 (
) =.
Playback is paused and “PAUSE” ap- pears in the display.
➮Press button 2 (
) = again to cancel pause.
Switching radiomonitor on/off
Note:
●You can switch the radiomonitor on/ off whilst a cassette is playing.
➮Press the MENU button <.
➮Keep pressing the 
or 
button ;until “RM ON” or “RM OFF” ap- pears in the display.
➮Press the 
or 
button ;to switch the radiomonitor on/off.
When you have finished making your changes,
➮press the MENU button <.
Skipping blank spaces (blankskip)
You can automatically skip blank spac- es on the tape that are longer than ten seconds. To do so, the “blankskip” fea- ture must be activated.
Note:
●You can switch “blankskip” on/off whilst a cassette is playing.
40