Blaupunkt C52, DJ52 operating instructions Switching ON/OFF, Switching on/off

Page 8

SWITCHING ON/OFF

Switching on/off

There are various ways of switching the car radio on and off, as described be- low.

Switching on/off using the ignition

If the car radio is correctly connected to the ignition and has not been switched off using the button 3, it is switched on/off simultaneously with the ignition.

You can also switch on your car radio when the vehicle ignition is off.

To do so, press the button 3.

Note:

To protect the vehicle battery, the unit switches off automatically after one hour.

Switching on/off using the flip/ release panel

Remove the flip/release panel. The unit switches itself off.

Replace the flip/release panel once more.

The device switches on. The most re- cent setting (radio, Cassette, CD-chang- er or AUX) is restored.

Switching on/off using the button

3

To switch the unit on, press the but- ton 3.

To switch the unit off, hold the but- ton 3 down for more than two seconds.

The car radio is now switched off.

Switching on by means of cassette insertion

If there is no cassette in the deck when the device is switched off,

press the button, 9. The flip-release panel opens.

Insert the cassette with the open side to the right gently into the drive until you can sense some re- sistance.

The cassette is automatically drawn into the drive.

As the cassette is drawn in, it must nei- ther be held back nor assisted.

Close the panel with gentle pres- sure until you feel it engage.

The device switches on. Cassette play starts.

30

Image 8 Contents
Bologna C52 Carolina DJ52 Page Page Controls Table of Contents Road safety InstallationAccessories International telephone informationTheft protection FLIP/RELEASE PanelFlip/release panel Switching ON/OFF Switching on/offVolume Adjustment Volume adjustmentSetting the switch-on volume Mute settingSetting the volume for the confirmation tone Radio Mode Radio modeSwitching to radio mode RDS function AF, REGStoring stations Tuning into a stationSetting the sensitivity of the station search mode Listening to preset stations Setting the scanning timeStoring stations automatically Travelstore Scanning receivable stations ScanPTY-EON Selecting running text display Setting the displayOptimising radio reception Switching traffic information priority on/off Setting the traffic announcement volumeTraffic Information Traffic informationCassette Mode Cassette OperationPausing During Play Switching the Radio Monitor On / offSampling All the Tracks on a Cassette Scan Fast WindingDolby* B Noise Reduction Skipping Blank TapeSelecting Tape Type CD Changer Mode CD changer modeInterrupting Play Pause Random play MIXScanning all tracks on all CDs Scan Clock Time Clock TimeTone and Volume Balance Tone and volume balanceSetting the level indicator BassExternal audio sources Technical dataExternal Audio Sources Blaupunkt GmbH