Automatically storing the strongest stations with Travelstore
You can automatically store the six most powerful FM stations of your current recep- tion area sorted according to their signal strength. This function is particularly con- venient on longer trips.
•Press the FMT button for two seconds.
The six strongest FM stations will be auto- matically stored on the memory bank “T” (Travelstore). When this process has been completed, the radio will play the first sta- tion.
If desired, stations can also be stored manually on the Travelstore bank (see “Stor- ing stations”).
Recalling stored stations
You can recall any stored station at the touch of a button.
•Select the waveband by pressing FMT or M•L. On FM, also choose the corre- sponding memory bank by pressing the FMT button as many times until the desired bank appears in the display.
•Press the corresponding preset button briefly to recall the station.
Scanning stored stations with Preset Scan
You can have all of the stored stations briefly scanned on all wavebands.
To start Preset Scan:
•Press SC for approximately two sec- onds.
All of the stored stations of the adjusted waveband will be scanned one after the oth- er. The memory bank and preset position of the currently scanned station will flash in the display.
To select a scanned station and switch off Preset Scan:
•Press SC briefly.
Scanning stations with Radio- Scan
You can also scan all stations which can be received.
To start the Scan function:
•Press SC briefly.
The scanned frequency or the station name will start flashing in the display. During the actual scanning process
To select a scanned station and switch off the
•Press SC briefly.
If no station is selected, the scan function will be automatically switched off after the frequency band has been run through com- pletely. The unit will tune in the station lis- tened to before starting the scan.
Changing the scan time
The scan time can be changed from be- tween five to a maximum of 30 seconds. Please refer to chapter “DSC programming - SCANTIME”.
Selecting the seek tuning sensi- tivity
You can alter the automatic seek tuning sensitivity.
If “lo” is displayed, the radio will only pick up strong, local stations (low sensitivity).
If “lo” does not light up, the radio will also pick up weaker, distant stations (high sen- sitivity).
The sensitivity level can be altered in both modes (see also chapter “DSC program- ming”).
ENGLISH DEUTSCH
FRAN AISÇ
ITALIANO NEDERLANDS SVENSKA
ESPA OLÑ
PORTUGU SÊ
41