Operation
Loading and Removing Discs
You can load up to three discs at a time.To load, remove, or replace a disc, press the DISC 1, DISC 2, or DISC 3 button.This will open the CD drawer to the corresponding disc tray holder. Insert, remove, or replace the disc and then press the button again and the CD drawer will close.
Note: Discs that are not currently being played may be removed during the operation of other dics. For example, you can remove Disc 2 while Disc 1 is playing. However, doing so while running a program will result in the program being erased.The
Play / Pause
To play a disc, press the PLAY / PAUSE button.To pause, press the PLAY / PAUSE button a second time during playback.To return to regular playback, press the PLAY / PAUSE button a third time. The pause symbol (two vertical bars) will light up in the upper righthand corner of the liquid crys- tal display if the
Stop Play
To stop play, press the STOP button. Once the STOP button is pressed, the disc will return to the first track on the disc.
Selecting Discs
Press the DISC button to switch from one disc to another.
Modes of Operation
There are five modes of operation: ONE, 1 DISC, 1 DISC INTRO, ALL, and ALL INTRO. Pressing the MODE button will cycle the
ALL - When selected, this mode will result in the playback of every disc currently installed in the
ALL INTRO - In this mode, the
1 DISC - This mode limits playback operation to only the disc currently selected. Once that par- ticular disc is finished, the
1 DISC INTRO - In this mode, the
ONE - This mode is only applicable when using the REPEAT function. When REPEAT is selected and the mode ONE is selected, the
8