Amplifier Section | Radio Section |
If the radio is turned off before the waiting period has elapsed, then the waiting period restarts as soon as the radio is turned on again.
Switching the code system off
•Turn off the radio.
•Simultaneously press preset buttons 1 and 4 and hold them down.
•Turn the set on.
“COD” will appear in the display.
•Enter the code number given in the Blaupunkt car radio passport and con- firm: See example “Restart following interruption …”.
The code system is now deactivated.
ON/OFF
For switching the set on,
•turn button 1 .
Your stereo is now ready for operation.
For switching the set off,
•turn button 1 .
Balance Control
Use button Cto balance the sound impres- sion of the right and left channel speaker.
Sound Control
Use the TONE button Dto adjust the sound according to your personal preference.
Selecting the Desired Waveband
With this set you can listen to FM stations of the frequency band from 87.5 to 108 MHz.
Tuning in a Station Automatical- ly
Tuning in the Following Station
•Press the upper part of the rocker switch /2.
The car stereo automatically starts searching for the next station.
Tuning in the Previous Station
•Press the lower part of the rocker switch /2.
The car radio automatically starts sear-
ching for the previous station.
If the rocker switch / 2 up/down is kept depressed, the station seek opera- tion continues to be carried out quickly in the corresponding direction.
Manual Tuning
All stations can also be tuned in “manually”:
•Press the rocker switch <</>> 3 on the left or the right. The frequency band is scanned in small steps.
16