Blaupunkt CD70 operating instructions External audio sources, Technical data

Page 36

EXTERNAL AUDIO SOURCES

TECHNICAL DATA

External audio sources

Instead of the CD changer, you can also con- nect up a different external audio source with a line output. Such sources can be, for exam- ple, portable CD players, MiniDisc players or MP3 players.

The AUX output has to be switched on in the install menu.

To connect up an external audio source, you will need an adapter cable, obtainable from any Blaupunkt dealer.

Switching the AUX input on/off

Hold down the MENU button 8 until the install menu appears on the display.

Press the soft key 4with the display allocation “AUX”.

When “AUX” appears on the display, the in- put is already activated.

Press the or button 7to switch AUX on or off.

Press the OK button 5 to return to the

previous menu level or the MENU but- ton 8to leave the menu altogether. The settings are now stored.

Note:

When the AUX input is switched on, it can be selected using the CDC button =.

Technical data

Amplifier

Output power:

4 x 25 watts sine in

 

accordance with

 

DIN 45 324 at 14.4V,

 

4 x 45 watts max.

 

power

Tuner

Frequency ranges:

 

FM

:

87.5 – 107.9 MHz

AM

:

530 – 1 710 kHz

FM transmission range:

 

 

30 - 15 000 Hz

CD

Transmission range:

 

20 - 20 000 Hz

Pre-amp output

 

4 channels:

5 V / 10 k

AUX input

 

Input sensitivity:

1,2 V / 10 k

Subject to changes!

36

Image 36
Contents San Francisco CD70 Open here Ouvrir s.v.p Por favor, abrir Favor abrir 14 13 Controls Table of Contents Road safety InstallationAccessories GuaranteeTheft protection, KeyCard Inserting the KeyCardRemoving the KeyCard Replacing / training KeyCardsOptical theft protection indicator LED Lost or damaged KeyCardsTraining a new KeyCard / entering the master code Switching on/off Changing settings Exiting the Install menuFirst use Volume adjustment Mute settingSetting the switch-on volume Setting the volume for the warning tone beepAudio settings Setting the display Setting the reading angleSetting the display brightness Radio mode Switching to radio modeSwitching the RDS function on and off Switching the AF function on and offTuning to a station Selecting short-/long-range receptionSetting station scanning sensitivity Storing stationsStoring stations automatically Travelstore Listening to preset stations Setting the scan timeRadio scan Programme type PTY Culture Travel Jazz Sport News POP Rock ClassicsOptimising radio reception Interference-related bandwidth selection SharxSwitching between stereo and mono Changing the displaySelecting radio text display Naming a stationRadio Mode CD Mode Repeating a track Repeat Programming favourite CD tracksNaming CDs Current input position flashesCD changer mode OptionalScanning all tracks on all CDs Scan Programming favourite CD tracks Setting the time Clock timeSwitching between 12- and 24-hour clock mode Permanent time display when unit is offDSA Digital Sound Adjustment Switching DSA on/offLining up the equaliser automatically Select sound preset Setting the equalisers manuallySelecting an equaliser Setting aid for the equaliser Sound impression/problem What to doSwitching DNC line-up on/off Setting the DNC increaseDNC Dynamic Noise CoveringSwitch-on delay for external pre- amplifier TMC for dynamic navigation systemsPre-amplifiers Setting the frequency and level for the subwoofer Setting the high-pass filterSubout/subwoofer High-pass filterTechnical data External audio sourcesBlaupunkt-Werke GmbH Important notice for customers in USA San Francisco CD70
Related manuals
Manual 38 pages 2.18 Kb