RADIO MODE
Switching to radio mode
To start the radio mode,
➮press the BND¥TS button 4
or
➮press the SRC button ;on the device or the SOURCE button ; on the remote control repeatedly until ÒTUNERÓ appears on the dis- play.
Switching the RDS function on or off (FM only)
The RDS function expands the per- formance spectrum of your tuner.
If the RDS function is activated, the radio automatically tunes into the best receivable frequency for the station that is currently set.
To use the RDS function,
➮press the MENU¥OK button 7.
ÒTUNER MENUÓ appears on the dis- play.
➮Press the MENU¥OK button 7to display the tuner menu.
ÒRDS ONÓ or ÒRDS OFFÓ appears on the display.
➮To switch RDS on/off, press the 
or 
button 6.
➮Press the MENU¥OK button 7 and then the DIS¥ESC button 5 to exit the menu.
The RDS functions are active if RDS appears on the display.
Selecting the waveband/ memory bank
This device can be used to receive sta- tions in the FM and AM frequency bands. Three memory banks (FM1, FM2 and FMT) are available for the FM waveband and two memory banks (AM and AMT) for the AM waveband.
Six stations can be stored in each memory bank.
To switch between the memory banks FM1, FM2 and FMT or the memory banks AM and AMT,
➮briefly press the BND¥TS button 4.
Tuning into a station
There are various ways of tuning into a station.
Automatic station seek tuning
➮Press the 
or 
button 6.
The radio tunes into the next receiva- ble station.
Tuning into stations manually
You can also tune into stations manu- ally.
Note:
You can only tune into stations manually if the RDS function is deactivated.
➮Press the 
or 
button 6.
16