BASIC FUNCTIONS | RADIO MODE |
Basic functions
Switching on/off
There are various ways of switching the unit on/off:
Switching on/off using the vehicle ignition
If the unit is correctly connected to the vehicle’s ignition and it was not switched off using button 1, it will switch on/off simultaneously with the ignition.
Switching on/off using button 1
➮To switch the unit on, press button
1.
The unit switches on.
➮To switch the unit off, press button
1.
The unit switches off.
Adjusting the volume
The volume can be adjusted in stages from 0 (off) to 50 (maximum).
➮To increase the volume, turn the volume control 2 to the right.
➮To decrease the volume, turn the volume control 2 to the left.
Adjusting the display
You can switch the colour of the display illumination between green and amber.
➮Press the COL button ;to switch between the colours.
Radio mode
Switching to radio mode
If you are in cassette mode,
➮press the FF button 
6 until it goes no further.
The cassette is ejected and the device switches to radio mode.
Selecting the waveband / memory bank
This unit can receive programmes broadcast over the FM frequency range as well as the MW and LW (AM) rang- es.
There are three memory banks availa- ble for the FM range and one for each of the MW and LW ranges.
Five stations can be stored in each memory bank.
To switch between the memory banks or wavebands,
➮keep pressing the BAND button 3 until the required memory bank or waveband appears in the display.
Tuning into a station
There are various ways of tuning into a station.
Automatic seek tuning
➮Press and hold down the 
or 
button 8 until automatic seek tu- ning begins.
The unit tunes into the next receivable station.
12