Blaupunkt RCM 127, DJ I Quick reference, Switching on/off with the on button Press on, Vol+ / Vol

Quick reference

1Switching on/off with the ON button: Press ON.

When switching the set on with the ON button, the KeyCard has to be insert- ed. The unit will play with the pre-ad- justed volume.

Switching on/off with the KeyCard: The set has to be turned on with the

ON button.

Note:

Read the information in chapter “KeyCard theft protection system”.

Switching on/off via the ignition:

When connected correspondingly, the set can also be turned on and off with the vehicle ignition.

After the ignition has been switched off, a double beep tone will remind you that you should remove the KeyCard before leaving your vehicle.

Switching on with the ignition being switched off:

To keep on operating the set when the ignition is switched off (KeyCard is in- serted), proceed as follows:

Press ON. The unit will be turned on. To avoid that the battery goes flat, the system will be turned off automatically after one hour of playback.

2VOL+ / VOL-

To alter the volume.

Each time the set is switched on, it will play with the pre-adjusted volume (VOL FIX).

You may also change the VOL FIX set- ting (see chapter “DSC programming”).

3

For instantly muting the volume.

By pressing the button the volume can be muted immediately. “MUTE” will appear in the display.

The function is cancelled by pressing

button or VOL+.

When pressing VOL-, the (mute) volume will be adopted.

To programme the mute volume level, proceed as follows:

•Adjust the desired volume.

•Press for 1 second until you hear a beep.

Now this volume level is stored as your mute volume.