Blaupunkt CR 47 operating instructions Audio Power Specifications, Other Specifications

Specifications

Audio Power Specifications

Power Output and Total Harmonic Distortion: 5.5 watts per channel minimum continuous average output into 4 ohms, 4 channels driven, from 35-15 000 Hz.

Other Specifications

Tuner
FM
Tuning Range:	87.5 - 108 MHz
FM Mono Sensitivity:	1.3 ∝V
Signal-to-Noise Ratio:	65 dB (stereo), 70 dB (mono)
Frequency Response:	35-15 000 Hz
AM
Tuning Range:	531 - 1602 kHz
Signal-to-Noise Ratio:	50 dB
Frequency Response:	35-5 000 Hz
Cassette
Signal-to-Noise Ratio:	55 dB
Tape Wow and Flutter:	0.3 %
Tape Frequency Response:	35-15 000 Hz
Audio
Speaker Impedance:	4-8 ohms
Maximum Amp Power:	4 X 10 watts (at 4 ohms)
RMS Power:	4 X 5.5 watts (at 4 ohms)
	acc. to DIN 45 325 at 14.4 volts
Bass Control:	± 10 dB at 100 Hz
Treble Control:	± 10 dB at 10 kHz
Loud:	+ 8 dB at 60 Hz
	+ 2 dB at 8 kHz
General
Dimensions (w/o projecting parts/controls):	179 x 50 x 150 mm
Mass:	Approx. 1.4 kg
Power Requirement (neg. grnd.):	12 V DC car battery (11-16 V DC allowable)
Operating Temperature:	-10°C to 50°C
Supplied Accessories:	• Unit
	• Faceplate
	• Wire Harness
	• DIN Sleeve
	• Mounting Hardware
	• Owner’s Manual

Design and specifications subject to change without notice.

32