Blaupunkt RCC 24 Tape operation, DSC programming, Inserting a tape, Care of your audio equipment

Tape operation

Inserting a tape

•Turn the set on.

•Insert a tape.

Fast Forward	Insert tape with
Start/stop:	side A or 1 facing up,
Press button briefly	the open side facing
	to the right

Press button firmly to eject the tape

When listening to a tape, the display shows “TAPE”.

As soon as the end of the tape is reached, the system switches to radio operation.

Care of your audio equipment

We recommend you to use C-60/C-90 tapes only in your car stereo. Protect your tapes by storing them away from dirt and dust and do not expose them to excessive temperatures (above 50°C). In order to ensure smooth tape operation, cold tapes should be warmed up before they are played. If dust collects on the rubber roller or on the audio head, problems may arise which affect tape operation or sound quality after approximately 100 hours of operation.

Normally it is sufficient to use a head cleaning cassette to clean your tape player; for tougher cases use a cotton swab (Q-tip) soaked with alcohol. Never use rigid tools to clean your unit!

DSC programming		DEUTSCH
This car radio offers direct software control
(DSC) to adjust a number of default settings
to your personal needs and store them.
The following step describes all the default		ENGLISH
settings which can be changed.
To activate the DSC mode,
•	press DSC.

Use the rocker switch to select and change		FRANÇAIS
is shown in the display.
the following adjustments. The default value
	Select function	ITALIANO
Change	+ Change
		NEDERLAND
setting	setting
	Select function
LOCAL	To adjust the tuning sensitivity	SVENSKA
(lo)	for local reception
	LOCAL 1 - high sensitivity
		ESPAGÑOL
	LOCAL 3 - low sensitivity
DIS	To adjust the tuning sensitivity
(dx)	for distant reception
		PORTUGUES
	DIS. 1 - high sensitivity

DIS. 3 - low sensitivity

23