![](/images/new-backgrounds/1182070/18207015x1.webp)
Tape operation
Cassetten-Scan
Press SC.
To stop cassette scan: Press SC once again.
Changer operation
CD-Scan
Press SC briefly.
All CD titles will be scanned briefly. To stop
Press SC once again.
@PTY (Programme Type)
In the PTY mode, the preset buttons become programme type buttons. With every preset you can select one pro- gramme type, such as for example
NEWS, SPORT, POP MUSIC, EDU- CATE, etc.
ADSC (Direct Software Control) Use the DSC function to customise certain programmable, basic settings
to suit your personal needs and prefer- ences. See chapter “DSC program- ming” for more information.
BAUD
To adjust the treble, bass, balance and fader.
If the display shows “TRE” or “BAS”, you can adjust the reproduction of the treble and bass frequencies with the rocker switch. If “BAL” or “FAD” is dis- played, you can set the balance (left/ right) and fader (front/rear).
Press AUD as many times as required and make the setting using the rocker switch.
Treble + / Fader front
Treble
Bass
Bass + / Balance right
The last setting will be stored automat- ically.
To switch off AUD: Press button once again.
If the setting remains unchanged with- in 8 seconds, the display will switch back to the previous condition.
Extra function AUD
Loudness - When listening at a low level, the Loudness function creates a more natural sound by boosting
the low frequency range.
Loudness on/off: Press AUD for ap- proximately 1 sec.
“LD” lights up in the display if the Loudness function is switched on. Please refer to chapter “DSC program- ming” for more information on how to program the Loudness boost.
32