Blaupunkt DJ A, DJ I Care notes, Switching CD changer operation on, Selecting CDs and titles

Page 13

Note:

If there is too much tension on the tape du- ring playback, the set may switch over by itself before having reached the end of the tape side. In this case check the condition of the cassette tape. Sometimes it helps to rewind it completely.

Care notes

To avoid possible problems, we recommend you to use C-60/C-90 type cassette tapes only. Store your tapes in a cool place away from dirt, dust and temperatures exceeding 50 °Celsius. Allow very cold tapes to warm up before playing them in order to avoid uneven tape transport. After approximately 100 hours of use, dust particles collected on the playback head or roller may lead to tape run problems and sound distortions.

Use a head cleaning tape to remove nor- mal dirt build-up. For tougher cases, use a cotton swab (Q-Tip) dipped in alcohol. Do not attempt to clean by inserting a hard ob- ject into the player!

CD changer operation

The changer CDC A 072 is included in the scope of delivery.

Note:

Use only standard circular CDs measuring 12 cm in diameter!

CDs measuring 8 cm in diameter or CDs in different shapes such as a butterfly or beer mug are not suitable for playback using this equipment.

This may result in the destruction of the CD or the CD drive.

We assume no liability for damage to the equipment caused by playing unsuitable CDs.

Switching CD changer operation on

A magazine containing at least one CD must be inserted.

Use SRC to switch the audio source:

Press SRC until the changer functions appear in the display.

Selecting CDs and titles

CD selection

Up/down:

Press / for approx. 1 sec.

Track selection

Up:

Press briefly.

Down:

Press twice or as many times as required.

To re-start the current track:

Press briefly.

74

Image 13
Contents Cleveland DJ a Proton Cleveland DJ I Proton Englishportuguêsespañolnederlandsfrançaisdeutsch Contents TA/AF Quick referenceLo.m To switch overAUD/LD AUD audio Loudness on/offCassette loading slot Display Reversing the tape/fast winding Attaching the faceDetaching the face Traffic safetyAttaching the face Selecting a waveband AF Alternative frequencySelecting the seek tuning sensi- tivity Station tuningChanging the memory bank Storing stationsRecalling stored stations Loudness Switching between stereoMono Switching off the beep tone Automatic seek tuning startReceiving traffic programme stations with RDS-EON Traffic announcement priority on/offTape operation CD changer operation Switching CD changer operation onCare notes Selecting CDs and titlesAppendix SpecificationsBosch Gruppe
Related manuals
Manual 25 pages 60.52 Kb