Blaupunkt RCM 127 Station tuning, Storing stations, Automatic tuning, Manual tuning with

Station tuning

Automatic tuning /

•Press /; the car radio will automati- cally search for the next station.

If you hold down the upper or lower part / of the rocker switch, seek tuning will speed up in the upwards or downwards di- rection.

Manual tuning:

•Press << >>; the frequency will change in short intervals in the downwards or upwards direction.

If you hold down the right or left part of the rocker switch, the frequency scan will speed up.

Scrolling through the broadcast networks (only FM)

Changing the memory bank (FM)

You can shift between the memory banks I,

IIand T in order to store stations and recall them later.

The currently selected memory bank is in- dicated in the display.

• Press the TS/BND button as many times as necessary until the desired memory bank lights up in the display.

Automatic tuning

Up

Down

Down in short intervals (if “AF” is off)

Up in short intervals (if “AF” is off)

Manual tuning with << >>

You can also tune in a station manually.

Condition:

AF must be switched off (i.e. the symbol does not light up in the display).

If necessary, deactivate AF:

•Press AF/TA for approximately 1 sec.

You can use the << >> buttons to tune in stations of your reception area.

If several programmes of the broadcast net- works can be received, you can scroll through them forwards by pressing >>, or backwards using the << button, e.g. NDR 1, 2, 3, 4, N-JOY, FFN, ANTENNE ...

For this it is necessary that the stations have been tuned in at least once and that “AF” is active (lights up in the display).

For this purpose, start automatic tuning, e.g. using Travelstore:

•Press TS/BND for 1 sec.; the system starts to run through the frequency band. The display shows “T-STORE”.

If “AF” does not light up,

•Press AF/TA for approximately 1 sec. This fulfils the requirements for selecting stations with << >>.

Storing stations

On FM, you can store five stations on the preset buttons 1, 2, 3, 4, 5 for each of the memory banks I, II and T.

On MW/LW, you can also store five stations each.

•Select the desired memory bank with TS/BND.

•Tune in a station with the rocker switch (either automatically or manually).

•Press and hold down the desired pre- set button until the radio resumes play after the muting (takes approximately 1 sec., confirmed by a beep).

Now the station has been stored.

The activated preset button is indicated in the display.

32