MP3/WMA mode
"001", "002", etc. The leading zeros must also be entered.
MP3 tracks can contain additional infor- mation such as the artist, album and track names (ID3 tags). This device can display ID3 tags (version 1).
When creating (encoding) MP3 files from audio files, you should use bit rates up to a maximum of 256 Kbit/sec.
This device can only play MP3 files that have the ".MP3" file extension.
Notes:
To ensure uninterrupted playback,
•do not try changing the file extension to ".MP3" of any files other than MP3 files and then attempt to play them! The device will ignore these invalid files during playback.
•Do not use "mixed" CDs containing both
•Do not use
Switching to MP3 mode
MP3 mode is activated in the same way as normal CD mode. For further information, please read the section entitled "Switching to CD mode" in the "CD mode" chapter.
Configuring the display
The following settings require that an MP3 CD is in the device.
Configuring the default display
You can display various types of informa- | ENGLISH |
| |
tion on the current track: |
|
• Track number and playing time "TRCK- |
|
TIME" |
|
• Track number and time |
|
• Directory number and track number |
|
| |
• Directory number and time |
|
• Directory number and playing time |
|
|
|
Note: |
|
After the MP3 scrolling text was |
|
scrolled once after a track change, the |
|
information is permanently shown on |
|
the display. |
|
To switch between the different display options,
press and hold down the DIS button 9for longer than 2 seconds.
For an additional selection, press and hold down the DIS button 9for longer than 2 seconds.
Configuring the MP3 scrolling texts
One of the following scrolling texts is shown once on the display with every track change. Afterwards, the configured stand- ard display is shown.
The available scrolling texts are:
•Directory name ("DIR NAME")
•Name of the track ("SONG NAME")
47