Blaupunkt MP35 Storing stations automatically Travelstore, Listening to preset stations

RADIO MODE

➮Press the MENU button 7.

➮Press the or button 6 repeat- edly until “SENS HI”or “SENS LO” appears in the display.

“SENS HI”means that the tuner is highly sensitive. “SENS LO”means it is set to the lower sensitivity setting.

➮Set the required sensitivity using the or button 6.

When you have finished making your changes,

➮press the MENU button 7.

Note:

●Different seek tuning sensitivities can be set separately for FM and AM respectively. To do so, activate the relevant waveband.

Tuning into stations manually

You can also tune into stations manual- ly.

➮Press the or button 6.

Storing stations

Storing stations manually

➮Select the required memory bank (FM1, FM2 or FMT) or the AM fre- quency range.

➮Tune into the station.

➮Press one of the station buttons

1 - 6 9 for longer than 2 seconds to store the station to that button.

Storing stations automatically (Travelstore)

You can automatically store six stations with the strongest reception in the re- gion. The stations are stored in the FMT or AM memory depending on the se- lected frequency range.

Note:

●Stations that were previously stored in this memory are deleted in the process.

➮Press and hold the BND•TS button 4 until the seek tuning starts.

The station storing procedure begins. “FM TSTORE” or “AM TSTORE” ap- pears in the display. After the process is completed, the station that is stored in location 1 of the respective memory bank will be played.

Listening to preset stations

➮Select the memory bank in which the station was stored.

➮Press the preset station button

1 - 6 9 of the station you want to listen to.

Scanning receivable stations (SCAN)

You can briefly play all the receivable stations by activating the scan function. You can set the scanning time to be- tween 5 and 30 seconds in the menu.

12