Blaupunkt MP74 US Selected frequency, To adjust the quality factor, User display item

The settings are saved.

➮ Press the joystick OK 8 or the AUDIO button : to close the menu.

EQUALIZER

Making adjustments	You can use the quality factor to adjust
➮ Press and hold down the AUDIO	the width of the filter. The higher you
	set the value for the quality factor the
button : for longer than two sec-
	more directly the filter will be applied to
onds.
	the selected frequency.
➮ Press the softkey 5 assigned to
	To adjust the quality factor,
the “USER” display item.
	➮ repeatedly press the joystick 8 to
➮ Press the softkey 5 assigned to
	the left or right until the quality fac-
the display item of the equalizer
	tor displayed after “Q” flashes.
(“EQ-1”, “EQ-2” or “EQ-3”) whose
	➮ Adjust the quality factor by press-
settings you want to change.
➮ Press the softkey 5 assigned to	ing the joystick 8 up or down.
	Note:
the display item of the equalizer

band (“LOW1”, “LOW2”, “HIGH1”, Proceed in the same way with all the “HIGH2” or “HIGH3”) whose setting frequencies that you want to adjust. you want to change.

The top line displays the frequency in Hz, the level in dB and the quality factor “Q”.

To select the frequency,

➮repeatedly press the joystick 8 to the left or right until the frequency flashes.

➮Adjust the frequency that you want

to change by pressing the joystick 8 up or down.

To adjust the level,

➮repeatedly press the joystick 8 to the left or right until the level dis- played in front of “dB” flashes.

➮Adjust the level for the frequency by pressing the joystick 8 up or down.

36