CD mode
Cancelling REPEAT
If you want to cancel the repeat function,
press the 4 RPT button :again.
"RPT OFF" appears briefly on the display and the RPT symbol disappears. Normal playback is then resumed.
Interrupting playback (PAUSE)
Press the button 3 
<. "PAUSE" appears on the display.
Cancelling pause
During the pause, press the button 3
<.
Playback is continued.
Configuring the display
You can select from two display types for CD mode:
•Track number and time
•Track number and playing time To change the display,
Press and hold down the DIS button 9for longer than 2 seconds.
Displaying CD text
Some CDs include CD text. The CD text might contain the names of the artist, al- bum and tracks.
You can allow the CD text to be displayed as scrolling text every time you switch to another track. The default display will ap- pear again after the whole CD text has been shown once. For further information, please read the section entitled "Configuring the display".
Switching CD text on/off
Press the MENU button :.
Press the 
or 
button 6repeatedly
| until "CD TEXT" appears on the display. |
|
Switch the CD text function on ("TEXT | ENGLISH | |
| ON") or off ("TEXT OFF") using the or | |
|
|
button 6.
When you have finished making your chang- es,
press the MENU button :twice.
Traffic announcements in CD mode
If you wish to receive traffic announcements in CD mode,
press the TRAF button =.
The priority for traffic announcements is activated if the display shows the traffic jam symbol. For further information, please read the chapter "Traffic information recep- tion".
Ejecting a CD
Press the 
button 7 next to the CD compartment.
The CD is ejected.
Remove the CD.
Notes:
•If a CD is ejected, the drive will auto- matically draw it back in again after approx. 10 seconds.
•You can also eject CDs whilst the device is switched off or whilst an- other audio source is activated.
41