Bush BR05DAB instruction manual Automatic Tuning, Manual Tuning, Storing a Station Preset

Page 11

BR05DAB

OPERATING INSTRUCTIONS

DLS(scrolling text)

Signal Strength

Program Type

Ensemble Name

Channel Frequency

Signal Error

Bitrate

Time

Date

1.DLS (Dynamic Label Segment) - This is the scrolling message that the broadcaster may include with their transmissions. This message usually includes information, such as program detail, song title etc.

2.Signal Strength - This shows the signal transmission level.

3.Program Type - This is the type and description of the program provided by the DAB+ station.

4.Ensemble Name - This will show the multiplex that is broadcasting the program you are listening to.

5.Channel Frequency - This displays the channel number and the transmission frequency.

6.Signal Error - If the transmission signal contains any errors, the system will apply corrections. The amount of signal corrections can be displayed as a numerical value between 0 and 99. As the value increases, you will hear the signal degrade.To improve reception, try adjusting the position of the antenna.

7. Bitrate - This shows the signal bit-rate and the signal mode.

8/9. Time and Date: This shows the current time and date provided by the broadcaster.

Please Note: A signal error rate of 30 or more will make the station inaudible.

FM OPERATION

To switch from DAB+ to FM, press the Mode Button. FM Mode will then show up on the display.

Automatic Tuning

1.Press the SCAN Button to auto search for the next available station.

2.If you find the reception is poor, use the Manual Tuning option below, to fine tune the station.

Manual Tuning

1.Press the < and > Buttons to manually scan through the frequency band.

2.The frequency will increases or decreases by 0.05MHz for each time you press < and > Buttons.

Storing a Station Preset

You can preset up to 10 FM stations for easy access as follows:

1.Tune to the station you wish to preset. Press and hold PRESET Button until the display shows:

2.Using the < and > Buttons, select the preset number from 1-10 you wish to use. Then press the SELECT Button to store the station.

Recalling a Station Preset

1.Press the PRESET Button and use the < and > Buttons to select your desired Preset.

2.Press the SELECT Button play that to play the Preset Station.

11

Image 11
Contents DAB+ Digital Radio Warranty Safety is importantSafety Instructions Contents Your DAB Radio What is DAB+ Getting Started Insert your Headphones Auto Scan Operating InstructionsRadio Info Manual TuneDRC Dynamic Range Control PruneRecalling a Station Preset Automatic TuningManual Tuning Storing a Station PresetAudio Setting Using the Menu in FM ModeScan Setting System Setting Troubleshooting Warranty PO BOX 6287 Silverwater NSW