JVC GET0140-001A, KS-FX842R Searching a station manually Manual search

ENGLISH

Searching a station manually: Manual search

1 Select the band (FM1 – 3, AM).

Each time you press the

button, the band changes as

follows:

FM1 FM2 FM3 AM

Note:

This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.

2 Press and hold ¢ or 4 until “M” (manual) starts flashing on the display.

3 Tune in to a station you want while “M” (manual) is flashing.

To tune in to stations of higher frequencies

To tune in to stations of lower frequencies

•If you release your finger from the button, the manual mode automatically turns off after 5 seconds.

•If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and 9 kHz intervals for AM—MW/LW) until you release the button.

When an FM stereo broadcast is hard to receive:

1 Press M (MODE) to enter the functions mode while listening to an FM stereo broadcast.

2 Press MO (monaural), while still in the functions mode, so that the MO indicator lights up on the display.

Each time you press the button, the MO indicator lights up and goes off alternately.

MO (monaural) indicator

When the MO indicator is lit on the display, the sound you hear becomes monaural but the reception will be improved.

8