Changing the standard plate
You can change the standard plate with another plate supplied with your unit.
You can also download them by visiting <http://www.jvc.co.jp/jvccar>.
•When changing the plate, be careful not to leave your fingerprints on the plate or cover.
1 Loosen the screws with the supplied hex screwdriver.
2 Remove the plate cover and the standard plate.
Standard
plate
Plate cover
3 Replace with another plate (a standard, cutout, or downloaded plate) of your preference.
•When attaching a standard plate
Standard plate
Plate cover
• When attaching a cutout or downloaded |
| |
plate | ENGLISH | |
Add the transparent plate (supplied) | ||
| ||
between the cutout or downloaded plate |
| |
and the plate cover in order to attach the |
| |
plate cover in place. |
| |
Cutout or |
| |
downloaded plate |
| |
Plate cover |
|
Transparent plate (supplied)
Notes:
•Be sure to keep the hex screwdriver for future use.
•Four spare screws for the plate cover attachment are provided with the unit. (See the Installation/ Connection Manual.)
•When you attach the plate cover, do not tighten the screws too hard; otherwise, the plate cover might be cracked.
How to use the cutout plates
1 Unfold the supplied cutout plates.
2 Cut the plates out using a scissors.
3 Trim out the window and two knobs using a knife on a rubber mat.
35