!Programmed play
You can choose up to 32 selections for playback in the order you like.
1Whilst in the stop mode, press the MEMORY/SET (MEMORY) button to enter the programming save mode.
2Press one of the 
1 - 
5 buttons
to select the desired disc.
Selected disc number
3Press the direct search buttons
on the remote control to select the desired track.
Selected track number
You can also select a track by pressing the 
or 
button.
4Press the MEMORY/SET (MEMO-
RY) button to save the track number.
5Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be programmed.
If you make a mistake, the programmed tracks can be cleared by pressing the CLEAR/DIMMER button.
6 Press the 
button.
The total number of memory will ap- pear.
7Press the 
/ 
button to start playback.
To clear the programmed selections: Press the CLEAR/DIMMER button on the re-
mote control whilst the "MEMORY" indicator is flashing.
Each time the button is pressed, one track will be cleared, beginning with the last track pro- grammed.
To cancel the programmed play mode:
Whilst in the stop mode and the "MEMORY" indicator is lit, press the CLEAR/DIMMER button on the remote control. The "MEMORY" indicator will disappear and all the programmed contents will be cleared.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indica- tor will be displayed. Then follow steps 1 - 6 to add tracks. The new tracks will be stored after the last track of the original programme.
To check which tracks are programmed:
Whilst the unit is stopped in the programmed play mode, press the 
or 
button.
Notes:
"When a disc with programmed tracks is ejected, the programme is automatically cancelled.
"Even if you press the
"During the programme operation, random play is not possible.
"During programmed play, the DIRECT PLAY button will not work.
4
CD or MP3 disc Playback
19
03/12/19 | TINSZA040AWZZ |