JVC KD-BT11 manual Storing your favorite programme types, Using the standby receptions

Page 10

Storing your favorite programme types

ENGLISH

You can store six favorite programme types.

 

 

Preset programme types in the number buttons

 

(1 to 6):

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1Select a PTY code (see page 7).

2Select the preset number (1 – 6) you want to store into.

Ex.: When “ROCK M” is selected

3Repeat steps 1 and 2 to store other PTY codes into other preset numbers.

4Finish the procedure.

Using the standby receptions

TA Standby Reception

TA Standby Reception allows the unit to switch temporarily to Traffic Announcement (TA) from any source other than AM.

The volume changes to the preset TA volume level if the current level is lower than the preset level (see

page 25).

To activate TA Standby Reception

The TP (Traffic Programme) indicator either lights up or flashes.

•If the TP indicator lights up, TA Standby Reception is activated.

•If the TP indicator flashes, TA Standby Reception is not yet activated. (This occurs when you are listening to an FM station without the RDS signals required for TA Standby Reception.)

To activate TA Standby Reception, tune in to another station providing these signals. The TP indicator will stop flashing and remain lit.

To deactivate the TA Standby Reception

The TP indicator goes off.

PTY Standby Reception

PTY Standby Reception allows the unit to switch temporarily to your favorite PTY programme from any source other than AM.

To activate and select your favorite PTY code for

PTY Standby Reception, see page 25. The PTY indicator either lights up or flashes.

•If the PTY indicator lights up, PTY Standby Reception is activated.

•If the PTY indicator flashes, PTY Standby Reception is not yet activated.

To activate PTY Standby Reception, tune in to another station providing these signals. The PTY indicator will stop flashing and remain lit.

To deactivate the PTY Standby Reception, select “OFF” for the PTY code (see page 25). The PTY indicator goes off.

8

Page 9 Page 11
Image 10
Page 9 Page 11
Contents KD-BT11 Español DanskΕλληνική Cesky SvenskaLietuviu EestiDetaching the control panel Attaching the control panel For safetyTemperature inside the car Information for Users on Disposal of Old EquipmentContents Cancel the display demonstration and set the clock PreparationUsing the control panel Basic operationsBluetooth indicator RDS indicators-AF, REG, TP, PTY Status of Bluetooth deviceTr track indicator Listening to the radioTo listen to a preset station Manual presettingPTY Search Using the standby receptions Storing your favorite programme typesPTY codes To cancel the prohibition, repeat the sameDisc operations Prohibiting disc ejectionFeatures Using the Bluetooth devicesBluetooth profile First time Pairing and PIN codeConnecting a Bluetooth device for Code to the unitDeleting a registered device Enter Bluetooth menuDisconnecting a device PHONE/AUDIO Establish the connection with a deviceWhen a text message comes When a call comesMaking a call To call a preset number How to enter phone numberPresetting the phone number To delete the phone numbersUsing the Bluetooth audio player Bluetooth InformationDisc RPT Listening to the CD changerSelect CD-CH Disc RNDALL RPT Listening to the iPodONE RPT Album RNDListening to the DAB tuner What is DAB system?By connecting the DAB tuner, this unit can do the following To tune in to an ensemble manuallyWhile receiving a DAB service Storing DAB services in memoryTuning in to a preset DAB service While receiving an FM RDS stationLine Input Adapter, KS-U57 AUX Input Adapter, KS-U58 Listening to the other external componentsYou can connect an external component to AUX auxiliary input jack on the control panelInstalling the lithium coin battery CR2025 Using the remote controller RM-RK50Before using the remote controller Searches for stations or DAB services if pressed briefly Selecting a preset sound modeSelect a sound mode Enter the adjustment mode MID TRE Adjusting the soundVolume FADER*2Preset value setting for each sound mode OFF HourHour Clock ADJ*2 Auto AF-REG *2Once Mode RearSCROLL*5 OFF SUB.WPhonebook Bluetooth settingsAuto Answer InitializeBasic operations More about this unitDisc operations Discs are dirty or scratched Bluetooth operationsPlaying an MP3/WMA disc Bit rate of MP3 32 kbps 320 kbps Sampling frequency of MP3PLS Reset General settings-PSMError IPodSymptoms Remedies/Causes TroubleshootingDisc Bluetooth CD changer Symptoms Remedies/Causes MP3/WMA playbackIPod To keep discs clean MaintenanceHow to handle discs Moisture condensationSpecifications Having Trouble with operation?
Related manuals
Manual 40 pages 22.13 Kb

KD-BT11 specifications

The JVC KD-BT11 is a versatile and feature-rich car audio receiver that caters to the needs of music enthusiasts and tech-savvy drivers alike. With its stylish design and robust performance, the KD-BT11 makes a strong statement in the realm of automotive audio equipment.

One of the standout features of the JVC KD-BT11 is its Bluetooth connectivity, enabling seamless wireless streaming of music from smartphones or other compatible devices. This feature allows users to enjoy their favorite playlists and podcasts without the hassle of tangled wires. The device also supports hands-free calling, providing convenience and safety while driving. The built-in microphone ensures clear communication, allowing users to focus on the road.

Another significant aspect of the KD-BT11 is its compatibility with various audio formats. It supports MP3, WAV, and WMA playback, giving users the flexibility to play their favorite tracks without worrying about format restrictions. The receiver also includes a customizable equalizer with a variety of pre-set options, enabling listeners to adjust the sound profile to their liking.

In terms of display and user interface, the KD-BT11 features a large, easy-to-read LCD screen that displays track information and settings clearly. The interface is designed for user-friendly navigation, ensuring that drivers can quickly access their music and settings without distraction. Additionally, the device supports ID3 tags, allowing users to see artist and song information easily.

The KD-BT11 is equipped with a powerful 4 x 50 Watts built-in amplifier that delivers high-quality sound, enhancing the overall listening experience. The receiver also includes various connectivity options such as USB and AUX inputs, making it easy to connect and charge external devices. The USB port supports playback of audio files directly from USB flash drives, providing yet another way to enjoy music on the go.

Moreover, the JVC KD-BT11 is designed with radio functionality in mind, featuring a built-in FM/AM tuner that provides access to various radio stations. It also supports RDS, which allows listeners to receive enhanced information about radio broadcasts, such as station names and program details.

In summary, the JVC KD-BT11 stands out as a well-rounded car audio receiver that combines modern technology with user-friendly features. Its Bluetooth connectivity, compatibility with multiple audio formats, and robust sound output make it an excellent choice for anyone looking to upgrade their in-car audio system. With its impressive versatility and stylish design, the KD-BT11 is a worthy addition to any vehicle.
Top Page Image Contents