JVC KD-G498 manual Additional Information, Playing a CD-R or CD-RW Playing an MP3 disc

Page 27

ADDITIONAL INFORMATION

Playing a CD-R or CD-RW

Playing an MP3 disc

 

 

 

•Use only “finalized” CD-Rs or CD-RWs.

•This unit can play back only the files of the same type which is first detected if a disc includes both audio CD (CD-DA) files and MP3 files.

•This unit can play back multi-session discs; however, unclosed sessions will be skipped while playing.

•Some CD-Rs or CD-RWs may not play back on this unit because of their disc characteristics, and for the following causes:

–Discs are dirty or scratched.

–Moisture condensation on the lens inside the unit.

–The pickup lens inside the unit is dirty.

–CD-R/CD-RW on which the files are written with “Packet Write” method.

–There are improper recording conditions (missing data, etc.) or media conditions (stain, scratch, warp, etc.).

•CD-RWs may require a longer readout time since the reflectance of CD-RWs is lower than that of regular CDs.

•Do not use following CD-Rs or CD-RWs:

–Discs with stickers, labels, or protective seal stuck to the surface.

–Discs on which labels can be directly printed by an ink jet printer.

Using these discs under high temperatures or high humidity may cause malfunctions or damage to discs.

•This unit can play back MP3 files with the extension code <.mp3> (regardless of the letter case—upper/lower).

•This unit can show the names of albums, artists (performer), and ID3 Tag (Version 1.0, 1.1, 2.2, 2.3, or 2.4) for MP3 files.

•This unit can handle only one-byte characters. No other characters can be correctly displayed.

•This unit can play back MP3 files meeting the conditions below:

–Bit rate: 8 kbps — 320 kbps

–Sampling frequency:

48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)

24 kHz, 22.05 kHz, 16 kHz (for MPEG-2)

–Disc format: ISO 9660 Level 1/Level 2, Romeo, Joliet, Windows long file name

•The maximum number of characters for file/ folder names vary among the disc format used (includes 4 extension characters—<.mp3>).

–ISO 9660 Level 1: up to 12 characters

–ISO 9660 Level 2: up to 31 characters

–Romeo*: up to 128 (72) characters

–Joliet*: up to 64 (36) characters

–Windows long file name*: up to 128 (72) characters

*The parenthetic figure is the maximum number of characters for file/folder names in case the total number of files and folders is 313 or more.

•This unit can recognize the total of 512 files, of 200 folder, and of 8 hierarchies.

•This unit can play back the files recorded in VBR (variable bit rate).

The files recorded in VBR have a discrepancy in elapsed time display, and do not show the actual elapsed time. Especially, after performing the search function, this difference becomes noticeable.

•This unit cannot play back the following files:

– MP3 files encoded with MP3i and MP3 PRO formats.

– MP3 files encoded in an unappropriated format.

– MP3 files encoded with Layer 1/2.

– Files which have the data such as WMA, WAVE, ATRAC3, etc.

•The search function works but search speed is not constant.

ENGLISH

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents KD-G498 ‡§√ËÕ߇≈Ëπ CDHow to forcibly eject a disc How to reset your unitContents Location of the Buttons Control panelDisplay window Remote controller Place the battery Preparing the remote controllerInstalling the battery Remove the battery holderBasic Operations Turning on the powerTo drop the volume in a moment To turn off the powerDemonstration Canceling the displaySet the minute Setting the clockTo check the current clock time or change the display mode During power offSelect the band FM1 3, AM Radio OperationsListening to the radio Searching for a station automatically Auto searchWhen an FM stereo broadcast is hard to receive Searching for a station manually Manual searchEach time you press Button, the band changes as follows Select the FM band FM1 3 you want to store FM stations into FM station automatic preset SSMManual preset Storing stations in memoryPreset number flashes for a while Tuning in to a preset stationInsert a CD into the loading slot CD OperationsPlaying a CD To stop play and eject the CDTo go to a particular track directly How to use the +10 and -10 buttonsTo fast-forward or reverse the track To go to the next or previous tracksTo play back tracks repeatedly Track Repeat Play To play back tracks at random Disc Random PlayTo cancel the prohibition and unlock the disc Playing a CD Text Prohibiting disc ejectionWhile pressing CD, press and hold 0 for more than 2 seconds Insert an MP3 disc into the loading slot MP3 OperationsPlaying an MP3 disc To stop play and eject the discTo skip to the next or previous files When TAG Disp is set to TAG on initial setting seeTo change the display information To fast-forward or reverse the fileTo go to a particular folder directly To skip to the next or previous folderTo select a particular file in a folder, press RPT indicator Current or Lights up Specified file RND and folder indicators Ex. When you select Fldr RNDMode Active Plays at random Indicator Mode Active Plays repeatedly IndicatorSound Adjustments Select the sound mode you wantIndication For Preset values Repeat steps 1 and 2 to adjust the other items Adjusting the soundSelect the item you want to adjust Adjust the settingOther Main Functions Changing the general settings PSMBasic Procedure Preferred Setting Mode PSM itemsTo select the amplifier gain control To select the dimmer mode-DIMMERTo select the scroll mode-SCROLL To turn the tag display on or offAttaching the control panel Detaching the control panelPlaying a CD-R or CD-RW Playing an MP3 disc Additional InformationBe erased. See TroubleshootingSymptoms Causes Remedies Drop the disc when it ejectsAbout mistracking Maintenance AM Tuner SpecificationsFrequency Range MHz to 108.0 MHz KHz to 1 602 kHz FM TunerVictor Company of Japan, Limited Noise interfere with sounds This unit does not work at all. * Have you reset your unit?Fuse blows Sound is distortedKD-G498
Top Page Image Contents