Installation and Connections, Precautions

Installation and Connections

Before installing or connecting the unit, please read the following and pages 2 and 3 of this manual thoroughly for proper use.

Warning

MAKE THE CORRECT CONNECTIONS.

Failure to make the proper connections may result in fire or product damage.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.

Failure to do so may result in electric shock or injury due to electrical shorts.

DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS.

Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, gear lever, brake pedals, etc. can be extremely hazardous.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.

When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.

Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT.

Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.

Caution

HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.

The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.

Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE.

Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wire’s insulation from being cut by the metal edge of the hole.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.

Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.

Precautions

•Be sure to disconnect the cable from the (–) battery post before installing your CDM-7874/CDE-7872/CDE- 7870. This will reduce any chance of damage to the unit in case of a short-circuit.

•Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage to the vehicle’s electrical system.

•When making connections to the vehicle’s electrical system, be aware of the factory installed components (e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the CDM- 7874/CDE-7872/CDE-7870 to the fuse box, make sure the fuse for the intended circuit of the CDM-7874/CDE- 7872/CDE-7870 has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your ALPINE dealer.

•The CDM-7874/CDE-7872/CDE-7870 uses female RCA-type jacks for connection to other units (e.g. amplifier) having RCA connectors. You may need an adaptor to connect other units. If so, please contact your authorized ALPINE dealer for assistance.

•Be sure to connect the speaker (–) leads to the speaker (–) terminal. Never connect left and right channel speaker cables to each other or to the vehicle body.

IMPORTANT

Please record the serial number of your unit in the space provided below and keep it as a permanent record. The serial number plate is located on the bottom of the unit.

SERIAL NUMBER:

INSTALLATION DATE:

INSTALLATION TECHNICIAN:

PLACE OF PURCHASE:

18-EN

CDE-7872, CDM-7874, CDE-7870 specifications

The Alpine CDE-7870, CDM-7874, and CDE-7872 are three highly regarded car audio head units known for their impressive sound quality, advanced features, and user-friendly interfaces. Each model caters to distinct preferences while maintaining Alpine's commitment to delivering exceptional audio experiences on the road.

The Alpine CDE-7870 stands out due to its blend of functional design and modern technology. It features a detachable faceplate for easy security when leaving the vehicle. With a high-performance 18W RMS power output, it delivers crisp, clear sound that enhances the listening experience. The unit supports various audio formats, including MP3, WMA, and AAC, ensuring versatility in playback options. Additionally, it includes an integrated Bluetooth system, allowing users to stream music wirelessly and engage in hands-free calling, which increases convenience during travel. The cde-7870 also features a vibrant multi-line display, ensuring easy readability of track information, even in bright sunlight.

The CDM-7874 offers similar audio capabilities but distinguishes itself with an expanded set of features focused on customization and connectivity. With support for high-resolution audio formats, it ensures that audiophiles can enjoy music with stunning clarity. The CDM-7874 also provides a built-in USB port and auxiliary input, allowing users to connect their devices directly, and charge them while on the go. One of the model's standout characteristics is its compatibility with Android devices, enabling Android users to enjoy seamless playback and control. Moreover, it boasts an advanced equalizer and sound tuning options, letting users tailor audio settings to their personal preferences.

The CDE-7872, while slightly more straightforward, does not compromise on sound quality or features. This model focuses on providing users with essential functionality at an attractive price point. It includes a powerful built-in amplifier and features a high-pass filter for better sound clarity, especially at higher volumes. The CDE-7872 also supports multiple audio formats and ensures easy connectivity with USB and aux inputs. Its user-friendly interface is designed for quick access to settings, making it ideal for those who value simplicity without sacrificing performance.

In summary, the Alpine CDE-7870, CDM-7874, and CDE-7872 each provide unique features tailored to meet diverse user needs while maintaining exceptional audio performance. Whether you're an audiophile, a casual listener, or someone who simply enjoys a good soundtrack on the road, these models deliver quality sound and practicality, embodying Alpine's legacy in the car audio industry.