JVC KD-LH3100 To select the font on the display -Font Type, To turn the tag display on or off-Tag

ENGLISH

To select the font on the display —Font Type

You can change the font types used on the

display. Select either “1” or “2” according to your

preference.

To turn the tag display on or off—Tag

An MP3 file can contain file information called “ID3 Tag” where its album name, performer, track title, etc. are recorded.

There are two versions–ID3v1 (ID3 Tag version 1) and ID3v2 (ID3 Tag version 2). If both ID3v1 and ID3v2 are recorded on a disc, ID3v2 information will be shown.

•	On:	Turns on the ID3 tag display while
		playing MP3 files.
		• If an MP3 file does not have ID3
		tags, folder name and file name
		appear.
		Note:
		If you change the setting from
		“Off” to “On” while playing an MP3
		file, the tag display will be activated
		when the next file starts playing.
•	Off:	Turns off the ID3 tag display while
		playing MP3 files. (Only the folder
		name and file name can be shown.)

To change the FM tuner selectivity

—IF Filter

In some areas, adjacent stations may interfere with each other. If this interference occurs, noise may be heard.

•	Auto:	When this type of interference
		occurs, this unit automatically
		increases the tuner selectivity so
		that interference noise will be
		reduced. (But the stereo effect will
		also be lost.)
•	Wide:	Subject to the interference from
		adjacent stations, but sound quality
		will not be degraded and the stereo
		effect will not be lost.

To turn on/off the key-touch tone—Beep

You can deactivate the key-touch tone if you do not want it to beep each time you press a button.

•	On:	Activates the key-touch tone.
•	Off:	Deactivates the key-touch tone.

To select the external component to use

—Ext Input (Only for KD-LH3100)

You can connect the external component to the CD changer jack on the rear using the Line Input Adapter KS-U57 (not supplied).

To use the external component as the playback source through this unit, you need to select which component—CD changer or external component—to use.

•Changer: To use the CD changer.

•Line In: To use the external component other than CD changer.

Note:

For connecting the Line Input Adapter KS-U57 and the external component, refer to the Installation/ Connection Manual (separate volume).

To turn the trim illumination on or off

—TrimIllum

You can illuminate the trim plate according to your preference.

•	On:	Illuminate the trim plate.
•	Audio:	Illumination changes as audio signal
		level changes.
•	Off:	Cancels the illumination.

42