JVC KD-S8R, KD-S777R, KD-SX878R manual Specifications, FM Tuner, MW Tuner, LW Tuner

Page 45

SPECIFICATIONS

AUDIO AMPLIFIER SECTION

Maximum Power Output: Front: 40 W per channel Rear: 40 W per channel

Continuous Power Output (RMS):

Front: 16 W per channel into 4 , 40 Hz to 20,000 Hz at no more than 0.8% total harmonic distortion.

Rear: 16 W per channel into 4 , 40 Hz to 20,000 Hz at no more than 0.8% total harmonic distortion.

Load Impedance: 4 (4 to 8 allowance) Tone Control Range

Bass: ±10 dB at 100 Hz

Treble: ±10 dB at 10 kHz Frequency Response: 40 Hz to 20,000 Hz Signal-to-Noise Ratio: 70 dB

Line-Out Level/Impedance: 2.0 V/20 kload (full scale)

Output impedance: 1 k

TUNER SECTION

Frequency Range

FM: 87.5 MHz to 108.0 MHz

AM: (MW) 522 kHz to 1,620 kHz (LW) 144 kHz to 279 kHz

CD PLAYER SECTION

Type: Compact disc player

Signal Detection System: Non-contact optical pickup (semiconductor laser)

Number of channels: 2 channels (stereo)

Frequency Response: 5 Hz to 20,000 Hz

Dynamic Range: 96 dB

Signal-to-Noise Ratio: 98 dB

Wow and Flutter: Less than measurable limit

GENERAL

Power Requirement

Operating Voltage: DC 14.4 V (11 V to 16 V allowance)

Allowable Operational Temperature: 0˚C to +40˚C

Grounding System: Negative ground Dimensions (W H D)

Installation Size:

182 mm 52 mm 150 mm Panel Size: 188 mm 58 mm 14 mm

Mass: 1.3 kg (excluding accessories)

Design and specifications subject to change without notice.

ENGLISH

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 µV/75 )

50 dB Quieting Sensitivity:

16.3dBf (1.8 µV/75 )

Alternate Channel Selectivity (400 kHz): 65 dB

Frequency Response: 40 Hz to 15,000 Hz

Stereo Separation: 30 dB

Capture Ratio: 1.5 dB

[MW Tuner]

Sensitivity: 20 µV

Selectivity: 35 dB

[LW Tuner]

Sensitivity: 50 µV

45

Image 45
Contents Instructions KD-SX878R/KD-S777R/KD-S8RBottom panel of the main unit Position And Reproduction Of LabelsContents CD Changer Operations Adjust the volume Turn on the powerAdjust the sound as you want see pages 22 Basic OperationsListening to the radio Radio Basic OperationsSelect the band FM1, FM2, FM3 or AM Start searching a stationFM station automatic preset SSM Storing stations in memoryPress and hold both buttons for more than 2 seconds Manual preset Select the FM1 bandTune into a station of 88.3 MHz Select the number 1 6 for the preset station you want Tuning into a preset stationSelecting FM reception sound Select the band FM1, FM2, FM3 or AM you wantWhat you can do with RDS EON RDS OperationsMode Using Standby Reception TA Standby ReceptionPTY Standby Reception Finish the setting Selecting Your Favorite Programme for PTY Standby ReceptionSearching Your Favorite Programme To store your favorite programme types To search your favorite programme type Select one of PTY codes stored in preset number buttons 1 toPTY codes Other convenient RDS functions and adjustmentsChanging the display mode while listening to an FM station Setting the TA volume levelAutomatic clock adjustment Playing a CD CD OperationsInsert a disc into the loading slot To stop play and eject the CDTo fast-forward or reverse the track Locating a track or a particular portion on a CDTo go to the next tracks or the previous tracks To go to a particular track directlySelecting CD playback modes To play back tracks at random Random PlayTo play back tracks repeatedly Repeat Play Prohibiting CD ejection Adjusting the sound Sound AdjustmentsSelect the item you want to adjust Adjust the levelSelect the sound mode you want Using the Sound Control MemoryIndication For Preset values Selecting and storing the sound modesRecalling the sound modes Call up the sound mode you want to adjust Storing your own sound adjustmentsRepeat the same procedure to store other settings To reset to the factory settingsOther Main Functions Setting the clockBasic Procedure Changing the general settingsCanceling Advanced SCM Selecting the level display Selecting 24-hour or 12-hour clockSelecting the external component to use only for KD-SX878R Selecting the telephone mutingHow to attach the control panel How to detach the control panelDetaching the control panel Unlock the control panelRemove the battery holder Installing the batteryPlace the battery Return the battery holderUsing the remote controller CD Changer Operations Playing CDsSelect the CD automatic changer To go to a particular disc directly Mode RPT Indicator Plays repeatedly Mode RND Indicator Plays at randomSelect the external component External Component OperationsThis section is only for KD-SX878R PreparationsDAB Tuner Operations Tuning into an ensemble and one of the servicesSelect the DAB tuner Select the DAB band DAB1, DAB2, or DAB3To restore the FM/AM tuner Select an service you want to listen toEnsembles of higher Start searching an ensemble To tune in a particular ensemble without searchingSelect the DAB tuner Storing DAB services in memorySelect the DAB band DAB1, DAB2, or DAB3 you want Tune into an ensemble you wantSelect a service of the ensemble you want Select the number 1 6 for the preset DAB service you want Tuning into a preset DAB serviceHandling CDs MaintenanceSymptoms Causes Remedies TroubleshootingFM Tuner SpecificationsMW Tuner LW TunerRefer to page of How to reset your unit Siehe Seite Zurücksetzen des GerätsZie de pagina met de paragraaf Het apparaat terugstellen
Related manuals
Manual 4 pages 16.9 Kb Manual 45 pages 42.84 Kb

KD-SX878R, KD-S777R, KD-S8R specifications

The JVC KD-S777R and KD-SX878R are two prominent models in JVC's lineup of car CD receivers, known for their robust feature sets and user-friendly designs aimed at enhancing the driving experience. Both models are designed with a focus on high-quality sound, versatility, and modern connectivity options, making them attractive choices for music enthusiasts.

The JVC KD-S777R is a notable model featuring a sleek design and a front-loading CD mechanism. It supports multiple audio formats, including MP3 and WMA playback, thus allowing users to enjoy a variety of digital music files stored on CDs or USB flash drives. One of its key advantages is its compatibility with the JVC remote control, providing effortless operation while driving. The receiver comes equipped with a 2-line LCD display that clearly shows track information, enhancing usability while on the road.

In terms of audio performance, the KD-S777R offers a powerful built-in amplifier, delivering crisp and clear sound quality. The unit features a 3-band equalizer and 12 preset equalizer settings, allowing users to customize their audio preferences for a more personalized listening experience. Additionally, the receiver is equipped with high-pass and low-pass filters for better speaker management, promoting optimal sound clarity across different audio frequencies.

On the other hand, the JVC KD-SX878R raises the bar with more advanced features. This model includes an advanced digital processing unit that enhances sound quality further, offering improved clarity and dynamics. The KD-SX878R also supports Bluetooth technology, enabling hands-free calling and wireless audio streaming directly from smartphones and other compatible devices. This feature not only enhances convenience but also ensures that drivers remain safe and focused on the road.

Both models include a line of compelling technological characteristics, such as a detachable faceplate for added security and a large preset memory for storing favorite radio stations. They also support RDS functionality, which helps provide real-time information such as station names and traffic updates.

Overall, JVC's KD-S777R and KD-SX878R car CD receivers stand out for their combination of quality, versatility, and innovative features. They cater to drivers looking for superior audio performance and modern connectivity solutions, making them excellent choices for any vehicle. Whether for casual listeners or audiophiles, these models provide an exceptional in-car listening experience that enhances the joy of driving.