ENGLISH
EXTERNAL COMPONENT OPERATIONS
Playing an external component
You can connect the external component to the CD changer jack on the rear using the Line Input Adaptor
31
Preparations:
•For connecting the Line Input Adaptor
•Before operating the external component using the following procedure, select the external input correctly. (See “Selecting the external component to use” on page 29.)
1 | Select the external component. |
|
• If “LINE IN”* does not appear on the display, see page 29 and select the external input (“LINE IN”).
*Displayed only when one of the following sources is selected
— FM, AM and CD.
Note on
When you press
to turn on the power.
2 Turn on the connected component and start playing the source.
3 | Adjust the volume. |
Using a subwoofer
By connecting a subwoofer to the SUB WOOFER plugs on the rear, you can enjoy enhanced bass sounds and a more realistic theater atmosphere in your car.
• Refer also to the instructions supplied with your subwoofer.
To set the subwoofer cutoff frequency, refer to “Selecting the subwoofer cutoff frequency” on page 28.
To adjust the subwoofer output volume, refer to “Adjusting the sound” on page 16.
36