JVC KW-XC88 manual Selecting preset sound modes, Select EQ, Select the sound mode, Step

Selecting preset sound modes

You can select a preset sound adjustment suitable to the music genre.

1 Select “EQ”.

SEL	EQ	EQ	S.BASS
	LV
		Canceled	L.V.METER

2 Select the sound mode.

The sound mode changes as follows:

FLAT Hard RockR & B* POP JAZZDanceMusic Country Raggae Classic USER** (back to the beginning)

*Rhythm and Blues

**If you want to adjust and store your original sound mode (USER), see “ Storing your own sound adjustments” on page 20.

EQ level changes as you select the sound mode.

Ex.: When you select “R & B”

To cancel the sound mode, select “FLAT”in

step 2.

Note:

You can adjust the sound mode to your preference, and store it in memory.

To store a sound mode separately for each playback source (EQ Link)

Once you select a sound mode, it is stored in memory. It will be recalled every time you select the same source. A sound mode can be stored for each of the following sources — FM1, FM2, FM3, AM, CD, tape, external components and the EX (extra) button (see page 10).

•See also“Changing general settings (PSM)” on page 22.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2 Press or to select “EQ LINK (Equalization Link).”

3 Press + to select “LINK ON.”

4 Press SEL (select) to finish the setting.

To cancel EQ Link, repeat the same procedure and select “LINK OFF”by pressing - in step 3.

•When “EQ LINK” is set to “LINK ON” The selected sound mode and Super Bass level can be stored in memory for the current source.

Each time you select the same source, the same sound mode is also recalled, and shown after the source name.

•When “EQ LINK” is set to “LINK OFF”

The selected sound mode effect applies to all the sources selected.

ENGLISH

19