Alpine CDE-9843, CDE-9841 Getting Started, Turning Power On and Off, Initial System Start-Up

Page 6

Getting Started

CDE-9845

SOURCE/POWER

Rotary encoder

c

MUTE/SETUP

CDE-9843

SOURCE/POWER

Rotary encoder

c

MUTE/SETUP

3Grasp the left side of the front panel and pull it out.

•The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel.) This is not a malfunction.

•To protect the front panel, place it in the supplied carrying case.

Attaching

1Insert the right side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit.

2Push the left side of the front panel until it locks firmly into the main unit.

2

1

•Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit.

•Attach the front panel carefully, holding the sides of the front panel to avoid pushing buttons by mistake.

CDE-9841

SOURCE/POWER

4/3

c

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MUTE/SETUP

Turning Power On and Off

Press SOURCE/POWER to turn on the unit.

•The unit can be turned on by pressing any other button except eject

c and TITLE .

Press and hold SOURCE/POWER for at least 2 seconds to turn off the unit.

• The first time power is turned on, the volume will start from level 12.

Initial System Start-Up

Be sure to press the RESET switch when using the unit for the first time, after changing the car battery, etc.

1Turn off the unit power.

2Remove the detachable front panel.

3Press RESET with a ballpoint pen or similar pointed object.

1

RESET switch

Adjusting Volume

Turn the Rotary encoder (CDE-9845/CDE-9843 only) or press 4 and 3 (CDE-9841 only) until the desired sound is obtained.

Detaching and Attaching the Front Panel

Detaching

1Turn off the unit power.

2Press (Release) at the lower left side until the front panel pops out.

Lowering Volume Quickly

Activating the Audio Mute function will instantly lower the volume level by 20 dB.

Press MUTE/SETUP to activate the MUTE mode.

The audio level will decrease by about 20 dB.

Pressing MUTE/SETUP again will bring the audio back to its previous level.

5-EN

Page 5 Page 7
Image 6
Page 5 Page 7
Contents CDE-9845 Contents Operating Instructions Never Attempt the Following On handling Compact Discs CD/CD-R/CD-RW Lowering Volume Quickly Turning Power On and OffAdjusting Volume Getting StartedRadio Manual Storing of Station PresetsPress TUNE/A.ME to select the tuning mode Listening to RadioPress in Radio mode to switch to Title Search mode Automatic Memory of Station PresetsTuning to Preset Stations Station Title Search Function CDE-9845 onlyPlayback Repeat Play X. Random PlayScanning Programmes About MP3/WMA CDE-9845/CDE-9843 only File Name Search modeFolder Name Search mode Selected track is played back immediatelyTerminology Corresponding File SystemsSound Setting Setting the Bass ControlDefeat Displayed Treble frequency is emphasized Setting the Treble ControlDisplay shows LD when the loudness mode is activated You can emphasize the treble frequencyDisplaying the Title/Text About the indicator displayOther Functions Press TitleErasing Disc Title/Radio Station Title Setting TimeTitling Discs/Radio Stations Displaying TimePress MUTE/SETUP for at least 2 seconds again Press g or f to select the desired Setup menuPress Band to change the setting Sound CustomizingVisual Customizing CDE-9845/CDE-9843 only MP3/WMA CDE-9845/CDE-9843 onlyExternal Device Basic InformationCase of Difficulty RadioSpecifications Indication for CD PlayerInstallation and Connections Installation Pull the unit out, keeping it unlocked as you do soConnections CDE-9845 onlyIllumination Lead Orange CDE-9845/CDE-9843 only To prevent external noise from entering the audio systemLimited Warranty ALPINE-1
Top Page Image Contents