Kenwood KDC-U7056DAB Display settings, Selecting a display type, Information display setting

Page 26

11. Display settings

11-1. Selecting a display type

Shown below are examples of display types.

1Press [Control] knob.

Enters the Function setting mode.

2Select “DISP&ILLUMI” > “Display Select” > “Type Select” using [Control] knob.

For how to use [Control] knob, refer to <3-3. How to select the item> (page 9).

3Select a Display type using [Control] knob.

Display type

Display information

Type A

Displays 3 lines of text.

Type B

Displays 2 line of text.

Type C

Displays the clock.

Type D

Displays the Spectrum analysis.

Type E[1]

Displays the Dynamic Label of Digital Radio.

Type F

Turn off the display and key illumination. (5 seconds

 

after completion of operation)

[1]Function of KDC-U7056DAB. Selectable only when in the Digital Radio source.

Exiting from the Function setting mode Press and hold [1/6].

11-2. Information display setting

You can set the side and graphic parts of the display.

1Press [Control] knob.

Enters the Function setting mode.

2Select “DISP&ILLUMI” > “Display Select” using [Control] knob.

For how to use [Control] knob, refer to <3-3. How to select the item> (page 9).

3Select a display setting item using [Control] knob.

Display

Description

“Side Select”

Sets the side part display for Type A, B, and D.

 

1 / 2 / 3 (Type A, B only)

“Graphic Select”

Sets the Type D Spectrum analysis display.

 

1 / 2

“Status”

Sets the status display (ON/OFF indicator for

 

each function) for Type A and B.[1]

 

“ON” / “OFF”

(Colored text: Factory setting)

[1]The status display automatically turns “OFF” during aha source and cannot be switched to ON.

4Select a setting using [Control] knob. Returns to the previous item.

Exiting from the Function setting mode Press and hold [1/6].

11-3. Illumination color selection

You can select the illumination color of the panel.

1Press [Control] knob.

Enters the Function setting mode.

2Select “DISP&ILLUMI” > “Color Select” using [Control] knob.

For how to use [Control] knob, refer to <3-3. How to select the item> (page 9).

3Select a illumination part using [Control] knob.

Display

Part

“Color SEL All”

All

“Color SEL Display”

Display

“Color SEL Key”

Button

4Select a color (“Variable Scan”/ “Color1” — “Color24”/ “User”) using [Control] knob.

Exiting from the Function setting mode Press and hold [1/6].

11-4. Adjusting the Illumination color

You can adjust the illumination color of the panel.

1Select the illumination color you want to adjust.

Select from among “Color1” to “Color24” or “User” with reference to <11-3. Illumination color selection> (page 53).

2Press and hold [Control] knob.

The RGB value of the selected illumination color is displayed and enters the Details color adjustment mode.

3Set the color.

Operation type

Operation

To select the color to adjust (Red,

Press [E] or [F].

Green, or Blue)

 

To adjust color (Range: 0 – 9)

Turn [Control] knob.

Determination of the adjusted color.

Press [Control] knob.

The color you created can be called by selecting “User”.

Exiting from the Function setting mode Press and hold [1/6].

52 KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056BTL

English 53

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Contents Important information Safety precautionBefore use Regulatory ComplianceAppendix TrademarksComponent names How to select the itemBasic operations PreparationsUSB terminal PowerVolume Auxiliary inputAudio control DSP settingsExiting from the Function setting mode Press and hold 1/6 Manual equalizer controlSelect a speaker type using Control knob Speaker settingX’Over setting Setting valueChannel level fine adjustments Listening position settingDelay time control Select a speaker using Control knob Speaker Display RangeDSP preset recall Resetting of DTA SettingsDSP preset Select YES using Control knobPlaying music Listen to the iPodModels of iPods/iPhones that can be connected to this unit Music searchDirect search Skip search ratio settingPlayback mode Skip searchSelect APP & iPod Mode using Control knob App & iPod mode settingPress SRC and select an iPod iPod source using Control knob Operation performed when APP & iPod Mode is set to onListening to the Pandora Pandora KDC-U7056DAB/ KDC-U7056BTRequirements Pandora Basic operationNew station registration PandoraBookmark registration Deletion of stationListening to the Aha Radio Aha RadioRequirements Aha Basic operationsSelect Initial Settings aha Source using Control knob Calling a number in the contentCanceling the call Select a aha source control method using Control knobListen to the CD/ Audio file Direct music search About the Audio fileAbout the discs used with this unit About the USB deviceAbout Kenwood Music Editor Light and Kenwood Music Control Handling discsListen to the tuner Station preset memoryRecall preset station Listening to the radioSelect Settings using Control knob Tuner settingDirect access tuning Exiting Direct access tuning modeExiting from the PTY mode Frequency step settingSelect Settings PTY Search using Control knob PTY Program TypeService list select Service preset memoryRecall preset service Listen to the Digital Radio KDC-U7056DABExiting from the Alphabet search mode Press and hold 1/6 Alphabet Search for serviceAnnouncement setup Listen to the Digital RadioExiting from the Replay mode Digital Radio settingDigital Radio initial settings ReplayAdjusting the Illumination color Display settingsInformation display setting Selecting a display typeSelecting a text display Display & Illumination setting Clock & date display type setting General settingsAdjusting the date Auxiliary input display settingInitial settings Registering a Bluetooth device Registering a BluetoothAbout the Bluetooth module Selecting the Bluetooth device you wish to connectBluetooth device registration test Display DescriptionCalling a number in the phone book Hands-free phoningReceiving a call Dialing a numberClearing the disconnection message Registering in the preset dial number listDuring a call Press and hold Ú Voice ControlDisplay of phone number types categories Start speakingPress SRC to select a Bluetooth audio BT Audio source Bluetooth audioSelecting a Bluetooth audio source Before useDownloading the phone book Bluetooth settingsRegistering the PIN code Deleting the phone bookSelect Settings Detailed Settings using Control knob Switching between two connected cell-phonesBluetooth detail setting Displaying the firmware versionBasic opreation Basic operation of remote controlBefore using remote control Operation/wiring error Troubleshooting guideSetting error Error messagesAha Messages

KDC-U7056DAB specifications

The Kenwood KDC-U7056DAB is a versatile and feature-rich car audio receiver designed to enhance your driving experience with state-of-the-art technology and exceptional sound quality. This model stands out for its robust set of features that cater to music enthusiasts and casual listeners alike.

One of the primary highlights of the KDC-U7056DAB is its built-in Digital Audio Broadcasting (DAB) functionality. This technology allows users to access a wide range of digital radio stations with crystal-clear sound quality, eliminating interference and providing superior audio clarity compared to traditional FM/AM signals. The DAB feature is complemented by the receiver's support for several audio formats, including MP3, WMA, and AAC, ensuring compatibility with diverse media sources.

Another significant aspect of the KDC-U7056DAB is its user-friendly interface, which includes a high-contrast LCD display. The display features adjustable brightness settings, making it easy to read in various lighting conditions. The multi-line text display provides essential information such as track titles, radio station names, and more, ensuring that users can navigate their media with ease.

The Kenwood KDC-U7056DAB also supports Bluetooth connectivity, enabling seamless wireless audio streaming from smartphones and other devices. The Bluetooth feature incorporates hands-free calling capabilities, allowing drivers to maintain focus on the road while easily managing calls. Additionally, the receiver supports a USB port, enabling direct connections to flash drives and smartphones for convenient access to stored music.

For those who enjoy customizing their sound experience, the KDC-U7056DAB includes a 13-band graphic equalizer, delivering extensive audio tuning options. Users can tailor their sound profile, adjusting frequencies to suit personal preferences while optimizing the audio experience for specific genres of music. The receiver also features a powerful amplifier, ensuring that even at high volumes, the sound remains clear and distortion-free.

Moreover, the KDC-U7056DAB is equipped with various audio enhancement technologies, such as the Sound Reconstruction feature, which restores audio lost in compression and elevates the overall listening quality. With six preouts, this model allows for easy integration with additional amplifiers and speakers, making it an ideal choice for audiophiles looking to develop a comprehensive sound system.

In summary, the Kenwood KDC-U7056DAB is a well-rounded car audio receiver featuring DAB radio, Bluetooth connectivity, USB input, and extensive audio customization options. Its combination of advanced technology and user-friendly design makes it an excellent choice for anyone looking to enhance their in-car audio experience.
Top Page Image Contents