Alpine CDA-7867, CDA-7969 owner manual Titling Discs/Stations

11-EN

NOTE

You cannot erase a CD-TEXT.

Press and hold the TITLE button for at least 3 seconds to cancel the disc title erasing mode.

Press the DN gor fUP button repeatedly unitl the disc title you want to erase is displayed.

3

4 Press and hold the -/Jbutton for at least 2 seconds to erase the disc title displayed.

5

Searching for Titled Discs/Titled Stations/CD Text Discs

If a CD/Station is titled, you can do a search for it. You can also search for CD TEXT discs by title. (To title CDs, refer to "Titling Discs/Stations" on page 11.)

1 Press and hold the T.S.M. button for at least 2 seconds. The title blinks in the display.

2 Press the DN gor fUP button to select the desired disc title/station title/CD Text disc.

3 Press the T.S.M. button to play the selected disc or station.

The unit will automatically search for the disc or station and begin play.

NOTES

∙ This function cannot be performed when using a multi- changer switching device.

∙ To search for a title from CD TEXT discs, first you need to playback the CD TEXT disc at least once so that it is registered in the unit’s memory.

Erasing Disc Title (CD/CD Changer only)

1 Press the TITLE button to select the disc titling mode. Then, press and hold for at least 3 seconds.

2 Press and hold the -/Jbutton for at least 2 seconds to activate the title scanning mode. The title in the display will blink.

Titling Discs/Stations

It is possible to title your favorite CD's or radio stations.

1 Press the TITLE button and select the title display mode.

For details, see Displaying the Title/Text (page 10).

2 Press and hold the TITLE button for at least 3 seconds. The first character will blink.

3 Rotate the Audio Control knob to select the desired letter/numeral/symbol available for naming. ("A" for example).

4 Press the -/Jbutton to store the first character. The first character will stop blinking and the display will automatically advance to the next character. When that character begins to blink, you may choose the next letter or symbol of your title.

5 Repeat the steps 3 and 4 above to complete the titling. Pressing the -/Jbutton after entering the 12th character, automatically stores the title into memory.

When entering a title of less than 12 characters (for example, 3 character title):

After entering 3 characters to complete your title, the 4th character space will be blinking. Go to step 6 to complete the title.

6 Press and hold the TITLE button for at least 3 seconds to record the title.

NOTES

∙The memory can store up to 150 titles for CD, CD Changer and radio stations. If you try to store beyond the limit, the display will show "FULL DATA." At this point, no more titles can be stored.

∙To input a new title, one of the previously inputted titles must first be deleted.

∙When you want to erase a title, enter the " " symbol

into all spaces.

∙The operations described in steps 3 to 5 must be made within 10 seconds. The input mode will be cancelled if no action is taken for over 10 seconds.