Alpine CDA-9885 owner manual 37-EN

Page 39

Antenna Receptacle

Power Antenna Lead (Blue)

Connect this lead to the +B terminal of your power antenna, if applicable.

•This lead should be used only for controlling the vehicle’s power antenna. Do not use this lead to turn on an amplifier, or a signal processor, etc.

Remote Turn-On Lead (Blue/White)

Connect this lead to the remote turn-on lead of your amplifier or signal processor.

Audio Interrupt In Lead (Pink/Black)

Connect this lead to the Audio interface output of a cellular phone which provides ground shorting when a call is received.

Illumination Lead (Orange)

This lead may be connected to the vehicle’s instrument cluster illumination lead. This will allow the backlighting of the CDA-9885 to dim whenever the vehicle’s lights are turned on.

Switched Power Lead (Ignition) (Red)

Connect this lead to an open terminal on the vehicle’s fuse box or another unused power source which provides (+)12V only when the ignition is turned on or in the accessory position.

Battery Lead (Yellow)

Connect this lead to the positive (+) post of the vehicle’s battery.

Ground Lead (Black)

Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided.

Power Supply Connector

Right Front (+) Speaker Output Lead (Gray) Right Front (–) Speaker Output Lead (Gray/Black) Right Rear (–) Speaker Output Lead (Violet/Black) Right Rear (+) Speaker Output Lead (Violet)

Left Rear (+) Speaker Output Lead (Green)

Left Rear (–) Speaker Output Lead (Green/Black) Left Front (–) Speaker Output Lead (White/Black) Left Front (+) Speaker Output Lead (White)

Fuse Holder (10A)

Ai-NET Connector

Connect this to the output or input connector of another device (CD Changer, Equalizer, HD Radio™ TUNER MODULE, etc.) equipped with Ai-NET.

•Interface adapter for iPodTM (KCA-420i) is not recommended for use with this product.

•You can input TV/video sound by connecting an optional Ai-NET/ RCA Interface cable (KCA-121B) to this component.

Steering Remote Control Interface Connector

To steering Remote control interface box.

Rear Output RCA Connectors

RED is right and WHITE is left.

Front Output RCA Connectors

RED is right and WHITE is left.

Subwoofer RCA Connectors

RED is right and WHITE is left.

Ai-NET Cable (Included with CD Changer)

RCA Extension Cable (sold separately)

iPod Direct Connector

Control iPod signals.

Connect this to an iPod or to an optional Bluetooth Box. To use a hands-free mobile phone, an optional Bluetooth Box connection is required. For details on connection, refer to the Owner’s Manual of the Bluetooth Box.

FULL SPEED™ Connection Cable (KCE-422i) (sold separately)

System Switch

When connecting a processor or divider using Ai-NET, place this switch in the EQ/DIV position. When no device is connected, leave the switch in the NORM position.

•Be sure to turn the power off to the unit before changing the switch position.

To prevent external noise from entering the audio system.

•Locate the unit and route the leads at least 10 cm away from the car harness.

•Keep the battery power leads as far away from other leads as possible.

•Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.

•If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise suppressors, contact them for further information.

•Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.

37-EN

Page 38 Page 40
Image 39
Page 38 Page 40
Contents CDA-9885 Page Contents Operating Instructions Installation and Connections Operating Instructions Never Attempt the Following On handling Compact Discs CD/CD-R/CD-RW Press SOURCE/ to turn on the unit Accessory ListTurning Power On and Off Getting StartedInitial System Start-Up Adjusting VolumeLowering Volume Quickly Setting the Time and CalendarRadio Presetting Stations ManuallyPresetting Stations Automatically Tuning to Preset StationsFrequency Search Function Receiving the Multicast Station Program ServicePlayback Repeat Play10-EN 11-EN Press 5 in the play or pause modeX. Random Play Searching from CD TextSelected track is played back immediately Quick SearchAbout MP3/WMA/AAC 12-EN13-EN Sound SettingEach press changes the mode as follows TerminologySetting the Treble Level Setting the Bass Control Setting the Treble ControlSetting the Bass Bandwidth Setting the Bass LevelDisplaying the Text Adjusting the High Pass FilterOther Functions Turning Loudness On/OffAbout Text Display in MP3/WMA/AAC mode16-EN About the indication displayPress Title repeatedly until the time is displayed Blackout Mode On and OffDisplaying Time 17-ENBluetooth Setting General Setting18-EN 19-EN Audio SettingDisplay Setting Tuner Setting Only when HD Radio is connected20-EN 21-EN SAT Radio Receiver OptionalReceiving Channels with the SAT Radio Receiver Optional Checking the SAT Radio ID NumberStoring the desired Sports Team Sirius only Storing Channel PresetsGame Alert Setup Receiving Stored ChannelsReceiving Weather or Traffic Information from SAT Radio Canceling the stored Alert Memory Sirius onlySearch Function Quick Search Function24-EN Setting the Auxiliary Data Field DisplayInstant Replay Function Sirius only Changing the DisplayIPod Optional Searching for a desired Song25-EN Direct Search Function Random Play Shuffle M.I.X26-EN Each press changes the display To cancel repeat play, select off with the above procedure27-EN Song is played back repeatedlyMulti-Changer Selection Optional Changer OptionalControlling CD Changer Optional Playing MP3 Files with the CD Changer OptionalRemote Control Controls on Remote Control29-EN 30-EN Battery ReplacementOpening the battery cover Replacing the batteryCase of Difficulty Information32-EN Indication for SAT Receiver ModeIndication for CD Player Indication for CD ChangerSpecifications Indication for iPod Mode33-EN 34-EN Installation and ConnectionsPull the unit out, keeping it unlocked as you do so Installation35-EN Removal36-EN Connections37-EN Page This Warranty does not cover the following Limited Warranty
Related manuals
Manual 118 pages 16.55 Kb

CDA-9885 specifications

The Alpine CDA-9885 is a high-performance car audio receiver that combines advanced technology with user-friendly features, making it a sought-after choice for audiophiles and casual listeners alike. As a product of Alpine, a renowned name in automotive audio systems, the CDA-9885 boasts a host of features that enhance both sound quality and usability.

One of the standout features of the CDA-9885 is its customizable user interface. The unit offers a vivid, easy-to-read display that can be adjusted to suit personal preferences. Users can change the color of the display and buttons to match their vehicle's interior, ensuring a seamless blend of style and functionality. This personalization extends to 3D album art display, allowing users to visually engage with their music collection.

The CDA-9885 supports a wide array of audio sources, including CD, MP3, WMA, and AAC formats. The built-in CD player ensures that users can enjoy traditional media, while the USB port and auxiliary input permit direct connection of digital devices such as smartphones and flash drives. Additionally, the receiver is compatible with iPod and iPhone, facilitating easy control and playback of music through these devices.

Sound quality is a primary focus of the CDA-9885, featuring a 24-bit digital-to-analog converter (DAC) that delivers superior audio fidelity. The unit also incorporates Alpine's Bass Engine technology, which allows users to tailor their sound experience with adjustable bass boost and subwoofer level control. Furthermore, the five-band parametric equalizer enables precise audio adjustments, catering to different music genres and personal tastes.

The CDA-9885 includes Bluetooth connectivity, enabling hands-free calling and audio streaming directly from compatible devices. This feature not only enhances convenience but also ensures safety while driving, as users can maintain focus on the road. An optional Bluetooth adapter can expand functionalities, including support for voice command features.

Another important characteristic of the CDA-9885 is its expandability. With three sets of preamp outputs, users can easily connect external amplifiers and subwoofers to create a more powerful audio system. The receiver is also compatible with Alpine's proprietary products, such as GPS navigation units and amplifiers, allowing for a complete audio solution tailored to individual preferences.

In summary, the Alpine CDA-9885 stands out in the realm of car audio receivers due to its exceptional features, advanced sound technologies, and user-friendly interface. Whether you're an audiophile looking for precise sound control or a casual listener wanting to enjoy music on the go, the CDA-9885 offers a versatile and high-quality listening experience that enhances any drive.
Top Page Image Contents