Vertex Standard VX-2100E manual Rear Panel, 13.6V DC Cable Pigtail with Connector

CONTROLS & CONNECTORS

Rear Panel

c
d	f
	e

c13.6V DC Cable Pigtail with Connector

The supplied DC power cable must be connected to this 2-pin connector. Use only the supplied fused cable, extended if necessary, for power connection.

dAntenna Socket

The 50-Ohm coaxial feedline to the antenna must be connected here, using a type-M (PL-259) plug.

eD-Sub 15-Pin Accessory Connector

External TX audio line input, PTT (Push To Talk), Squelch, and external RX audio line output signals may be obtained from this connector for use with acces- sories such as data transmission/reception modems, and external Channel con- trol input etc.

fExternal Speaker Jack

An external loudspeaker may be connected to this 2-contact, 3.5-mm mini-phone jack.

Caution: Do not connect either wire of this line to ground, and be certain that the speaker has adequate capability to handle the audio output (12 W) from the radio.

4 VX-2100E SERIES OPERATING MANUAL