Alpine CDA-7892E owner manual Installation and Connections, Precautions

Page 28

Installation and Connections

Before installing or connecting the unit, please read the following and pages 2 and 3 of this manual thoroughly for proper use.

Warning

MAKE THE CORRECT CONNECTIONS.

Failure to make the proper connections may result in fire or product damage.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.

Failure to do so may result in electric shock or injury due to electrical shorts.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.

Caution

HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.

The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.

Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE.

Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wire’s insulation from being cut by the metal edge of the hole.

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.

When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.

Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury.

If swallowed, consult a physician immediately.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT.

Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.

Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.

Precautions

•Be sure to disconnect the cable from the (–) battery post before installing your CDA-7892E. This will reduce any chance of damage to the unit in case of a short-circuit.

•Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage to the vehicle's electrical system.

•When making connections to the vehicle's electrical system, be aware of the factory installed components (e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the CDA-7892E to the fuse box, make sure the fuse for the intended circuit of the CDA-7892E has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your ALPINE dealer.

•The CDA-7892E uses female RCA-type jacks for connection to other units (e.g. amplifier) having RCA connectors. You may need an adaptor to connect other units. If so, please contact your authorized ALPINE dealer for assistance.

•Be sure to connect the speaker (–) leads to the speaker (–) terminal. Never connect left and right channel speaker cables to each other or to the vehicle body.

IMPORTANT

Please record the serial number of your unit in the space provided below and keep it as a permanent record. The serial number plate is located on the bottom of the unit.

SERIAL NUMBER:

INSTALLATION DATE:

INSTALLATION TECHNICIAN:

PLACE OF PURCHASE:

26-EN

Page 27 Page 29
Image 28
Page 27 Page 29
Contents CDA-7892E Alpine CD Changers Give You More Contents Precautions Never Attempt the Following Turning Power On and Off Basic OperationDetaching the Front Panel Attaching the Front PanelSetting Time Display Angle Adjustment Audio Mute FunctionDisplaying Time Setting the Treble Control Setting the Bass ControlAdjusting the built-in Crossover Example 1. Listening Position Front Left Seat About the Time CorrectionExample 2. Listening Position All Seats Example of Steps 2 and 3 Setting Bass FocusTime Correction Setting the MX ModeTime Difference Table Quick Searching Function Changing the Audio Level DisplayDisplaying the Title/Text About Title and TextTitling Discs/Stations Erasing Disc Title/Station TitleSetup Operation Switching the Tuner ModeSubwoofer On and Off Sound Beep Guide FunctionScroll Setting Turning Mute Mode On/OffSetting the AUX Mode V-Link Speakers Connecting to an External AmplifierAmplifier Setting the Defeat of the External Input DemonstrationAutomatic Seek Tuning Manual TuningRadio Operation Automatic Memory of Station Presets Manual Storing of Station PresetsTuning to Preset Stations Opening and Closing the Movable display CD Player OperationPlayback Music Sensor Skip Fast Forward and BackwardX. Random Play Repeat PlayMulti-Changer Selection When a 12-disc CD Changer is connectedControlling CD Changer Optional MP3 Changer Operation Optional Selecting FoldersPlaying MP3 Files File SearchSetting the Range of MP3 File Selection Information Case of DifficultyNo Magzn Specifications FM Tuner SectionInstallation and Connections PrecautionsInstallation RemovalConnections To vehicle phone Ignition KeyAntenna Receptacle Power Antenna Lead Blue To prevent external noise from entering the audio system

CDA-7892E specifications

The Alpine CDA-7892E is a high-performance car audio receiver known for its impressive sound quality and advanced features designed for audiophiles and casual listeners alike. One of its standout attributes is its compatibility with various audio formats, including MP3, WMA, and AAC. This versatility allows users to enjoy a diverse range of music files, ensuring that their favorite tracks sound great regardless of the format.

One of the main features of the CDA-7892E is its customizable audio settings. With a built-in 3-band parametric equalizer, users can adjust the sound to their preference, emphasizing certain frequencies to achieve a more personalized audio experience. Additionally, the receiver features advanced high and low pass filters, enabling users to optimize their speaker setup. This level of customization is ideal for those who value sound quality and wish to tailor their listening environment.

Another notable characteristic of the CDA-7892E is its robust connectivity options. The unit is equipped with a front-panel USB input, allowing direct connection to USB storage devices for easy playback of digital music files. Furthermore, it comes with an auxiliary input to connect external devices easily, such as smartphones or portable music players, giving users flexibility in their audio sources.

In terms of display, the CDA-7892E features a bright, easy-to-read LCD screen that provides essential information such as track details, volume level, and equalizer settings. The illumination options allow users to customize the display to match their vehicle's interior, enhancing the visual appeal of their dash.

For those who enjoy radio, the Alpine CDA-7892E delivers excellent AM/FM performance, complete with RDS functionality, which provides real-time information such as song titles and artist names. The unit is also equipped with preset options, allowing users to save their favorite stations for quick access.

Built with quality components and a robust design, the CDA-7892E is engineered to deliver reliable performance over extended use. Its sleek styling and ergonomic controls enhance usability, ensuring that drivers can operate the receiver safely while on the road.

Overall, the Alpine CDA-7892E stands out as a sophisticated car audio solution, merging advanced features, customizable options, and excellent connectivity to create a truly enjoyable listening experience for any music lover. Whether driving on a long journey or commuting short distances, this receiver ensures that high-quality sound is always within reach.
Top Page Image Contents