Troubleshooting
Troubleshooting
In this chapter you will receive important information for malfunction localization and remedies. Observe the instructions in order to avoid danger and damage.
Safety instructions
WARNING
Observe the following safety information to avoid danger and property damage:
►Repairs to electronic devices may only be carried out by specialists who have been trained by the manufacturer. Considerable danger to the consumer and damage to the device can occur as a result of incorrect repairs.
Malfunction causes and remedies
The following table will help with localizing and remedying minor malfunctions:
Defect | Possible cause | Solution | |
The device will | The ignition is not switched on. | Switch the ignition on by turning the key. | |
not switch on | The fuse is defective. | Replace the fuse. | |
| |||
| The volume is set to minimum. | Increase the volume. | |
| The cables are not connected | Check the cable connections. | |
No sound | correctly. | ||
| |||
| The sound is switched off. | Press the MUTE button to switch | |
| the sound back on. | ||
|
| ||
| A CD is already inserted into | Remove the CD. | |
| the device. | ||
|
| ||
| The CD has been inserted | Insert the CD with the inscripted | |
| the wrong way up. | side up. | |
The CD will not | The CD is dirty or defective. | Clean the CD or insert a different CD. | |
load or eject | The temperature in the | Allow the vehicle to air out until the | |
| |||
| temperature has again dropped to the | ||
| vehicle is too high. | ||
| operational temperature. | ||
|
| ||
| Condensation on the laser | Switch the device off for a few hours | |
| lens | and then try it again. |
GB
IE
KH 2377 | 35 |