SPECIFICATIONS
RADIO SECTION
(FM) |
|
Frequency Range | 87.5 MHz |
| 87.5 MHz |
Usable Sensitivity | 12.7 dBf |
50 dB Quieting Sensitivity | 17.2 dBf |
IF Rejection | 80 dB |
Frequency Response | 30 Hz – 15,000 Hz |
S/N Ratio | 63 dB |
Stereo Separation | 35 dB at 1 kHz |
Alternate Channel Selectivity | |
| 70 dB |
Capture Ratio | 3 dB |
(AM) |
|
Frequency Range | 530 kHz – 1,710 kHz |
| 531 kHz – 1,602 kHz |
Usable Sensitivity | 30 ∝V (30 dB) |
Set the frequency increment for your area using the switch on the bottom of the unit.
(The switch is set at the factory to the 10k position [for the U.S.A.])
CD SECTION
Frequency Response | 17 Hz – 20 kHz |
Dynamic Range | More than 80 dB |
Channel Separation | More than 65 dB |
S/N Ratio | More than 85 dB |
Wow/Flutter | Unmeasurable |
AUDIO SECTION
Max. Power Output 45 W x 4 channels
TAPE/MD IN input
Input Sensitivity (load impedance) | |
TAPE/MD IN | 500 mV (10 kΩ) |
GENERAL
Power Supply Voltage | 14.4 V (11 to 16 V allowable), | ||||
| DC, negative ground |
|
| ||
Load Impedance | 4 Ω |
|
|
|
|
Tone Control | Bass ±10 dB at 100 Hz |
| |||
| Treble ±10 dB at 10 kHz | ||||
Preamp Output Voltage (load impedance) |
|
|
| ||
| 2.2 V (10 kΩ) |
|
|
|
|
Installation Size | 182 (W) x 53 (H) x 155 (D) mm | ||||
| (71/ (W) x 21/ | 8 | (H) x 61/ | 8 | (D) inches) |
| 4 |
|
| ||
•Design and specifications are subject to change without notice.
ACCESSORIES / PACKAGE LIST
REF. NO. | PART NO. | KANRI | DESCRIPTION |
1 | IB,INST,YU,YL (3L,P) | ||
1 | IB,YU(3L) 107 | ||
2 | NUT,5 | ||
3 | |||
4 | |||
5 | |||
6 | HLDR,HALF | ||
7 | KEY,REMOVE | ||
8 | HLDR,REAR MTG | ||
9
10
11 | CONN ASSY,16P B52 |
- 2 -