Playing MP3 Files with the CD Changer (Optional)
If you connect a changer compatible with MP3, you can play
1 Press SOURCE/ to switch to the MP3 Changer mode.
2 Press any one of the disc select buttons
(1 through 6) corresponding to one of the discs loaded in the CD Changer.
3 To pause playback, press / /ENT. Pressing / /ENT again will resume playback.
•The unit can play discs containing both audio data and MP3 data.
•For operating MP3 with an MP3 compatible CD Changer, refer to “CD/MP3/WMA/AAC” pages 9 to 12.
Multi-Changer Selection (Optional)
Alpine’s
1 Press SOURCE/ on this unit to activate the CD Changer mode.
Alternatively, press SOURCE on the remote control
SOURCE
BAND
2 Press BAND on this unit or the
The CD Changer Selection mode remains active for a few seconds.
3 Press BAND until the desired CD Changer indicator appears on the display.
Alternatively press BAND on the Remote Control until the desired changer indicator appears on the display.
•If the selected CD Changer is not connected, the display will show “NO CHANGER - (No.)”.
•To operate the selected changer, see “CD/MP3/WMA/AAC” (pages 9 to 12).
•For further details about the external input (AUX) when using
Remote Control
Controls on Remote Control
Source Button
Press this button to select the audio source.
Volume Adjustment Buttons
To increase the volume level:
Press the button
To decrease the volume level:
Press the button
Button
Radio mode: Pressing this button will select, in ascending order, stations programmed into the radio’s presets as shown below.
...
CD Changer mode: DISC Select (UP) button
Press this button to select a disc in ascending order.
MP3/WMA/AAC mode: Folder Select (UP) button Press this button to select the folder.
MP3 compatible CD changer mode:
Folder Select (UP) / DISC Select (UP) button
Press this button to select a folder in ascending order. Press and hold this button to select a disc in ascending order.
iPod mode: Switches Playlist/Artist/Album.
DN Button
Radio mode: SEEK (DN) Button
CD/iPod mode: Press this button to go back to the beginning of the current track.
/ Button
Press this button to switch between the Play and Pause modes for CD.
Audio Processor Button
Press the button to call the external audio processor mode when the external audio processor is connected*1.
*1 For the operation of external audio processor, refer to the Owner’s Manual of the external audio processor you purchased.
Power Button
Press this button to turn the power on/off.