Repeat Play
1 Press the RPT(Repeat) button to play back repeatedly the track being played.
The RPT indicator appears and the track will be played repeatedly.
Press the RPT button again and select OFF to deactivate the repeat play.
NOTE
If a CD Changer is connected and the RPT ALL mode is selected, the unit repeatedly plays back all tracks on the disc selected
→REPEAT → REPEAT ALL → OFF
NOTE
In case a
Press the "F" button to illuminate the "FUNC" indicator and go to step 1.
M.I.X. (Random Play)
1 Press the M.I.X. button in the play or pause mode.
The M.I.X. indicator will illuminate and the tracks on the disc will be played back in a random sequence. After all the tracks on the disc have been played back once, the player will begin a new random sequence play until the M.I.X. mode is cancelled.
To cancel M.I.X. play, press the M.I.X. button again to turn off the M.I.X.
NOTE
In case a
Press the "F" button to illuminate the "FUNC" indicator and go to step 1.
Scanning Programmes
1 Press the SCAN button to activate the Scan mode.
The first 10 seconds of each track will be played back in succession.
To stop scanning, press the SCAN button and deactivate the Scan mode.
NOTE
In case a
Press the "F" button to illuminate the "FUNC" indicator and go to step 1.
Controlling CD Changer (Optional) (CDM-7854E only)
If an optional Alpine
NOTE
The CD controls on the
1 Press the SOURCE button to activate the changer mode.
The display shows the disc number and track number.
2 Press the Disc Select buttons (1 through 6) corresponding to one of the discs loaded in the CD Changer. The selected disc number appears in the display and CD playback starts.
NOTES
•After selecting the desired disc, you can operate in the same way as for the
For details, please see the CD Player Operation section.
•If the "FUNC" indicator is illuminated the Disc Select buttons become nonfunctional.