Getting Started
SOURCE/ | Rotary encoder |
Attaching
1 Insert the left side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit.
2 Push the right side of the front panel until it locks firmly into the main unit.
VIEW |
Accessory List |
| |
• | Head unit | 1 |
• | Power cable | 1 |
• | Mounting sleeve | 1 |
• | Carrying case | 1 |
• | Bracket key | 2 |
• | Rubber Cap | 1 |
• | Bolt Stud | 1 |
• | Owner’s Manual | 1 set |
Turning Power On and Off
Press SOURCE/ 
to turn on the unit.
•The first time power is turned on, the volume will start from level 18.
Press and hold SOURCE/
for at least 2 seconds to turn off the unit.
Detaching and Attaching the Front Panel
Detaching
1 Turn off the unit power.
2 Press 
(Release) at the upper right side until the front panel pops out.
3 Grasp the right side of the front panel and pull it out.
•The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel). This is not a malfunction.
•To protect the front panel, place it in the supplied carrying case.
•When detaching the front panel, do not apply excessive force as it may result in malfunction.
•Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit.
•Attach the front panel carefully, holding the sides of the front panel to avoid pushing buttons by mistake.
Adjusting Volume
Turn the Rotary encoder until the desired sound is obtained.
Adjusting Volume : 0 ~ 40
Controllable with Remote Control
This unit can be controlled with an optional Alpine remote control. For details, consult your Alpine dealer. Point the optional remote control transmitter at the
Remote control sensor