Alpine CDE-100E Antenna Receptacle ANT Cont Lead Blue, Switched Power Lead Ignition Red

Page 20

1Antenna Receptacle

2ANT CONT Lead (Blue)

Connect this lead to the +B terminal of your power antenna, if applicable.

•This lead should be used only for controlling the vehicle’s power antenna. Do not use this lead to turn on an amplifier etc.

3AMP CONT Lead (Blue/White) (CDE-100EUB only) Connect this lead to the remote turn-on lead of your amplifier or signal processor.

4Switched Power Lead (Ignition) (Red)

Connect this lead to an open terminal on the vehicle’s fuse box or another unused power source which provides (+)12V only when the ignition is turned on or in the accessory position.

5Battery Lead (Yellow)

Connect this lead to the positive (+) post of the vehicle’s battery.

6Ground Lead (Black)

Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided.

7Power Supply Connector

8Right Front (+) Speaker Output Lead (Gray)

9Right Front (–) Speaker Output Lead (Gray/Black)

0Right Rear (–) Speaker Output Lead (Violet/Black)

qa Right Rear (+) Speaker Output Lead (Violet)

qs Left Rear (+) Speaker Output Lead (Green)

qd Left Rear (–) Speaker Output Lead (Green/Black) qf Left Front (–) Speaker Output Lead (White/Black) qg Left Front (+) Speaker Output Lead (White)

qh Fuse Holder (15A)

qj Rear Output RCA Connectors (CDE-100EUB only)

RED is right and WHITE is left.

qk RCA Extension Cable (sold separately) ql Front AUX Input Termina

This terminal allows for input of audio from an external device (such as a portable player), using a commercially- available converter cable.

w; USB Connection Terminal (CDE-100EUB only)

Connect USB memory (sold separately)

To prevent external noise from entering the audio system.

•Locate the unit and route the leads at least 10 cm away from the car harness.

•Keep the battery power leads as far away from other leads as possible.

•Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.

•If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise suppressors, contact them for further information.

•Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Please read before using this equipment CDE-100EUB/CDE-100EPage Halt USE Immediately if a Problem Appears USE the Correct Ampere Rating When Replacing FusesMinimize Display Viewing While Driving Do not Disassemble or AlterInstallation Location Disc CleaningDisc Accessories Never Attempt the FollowingTo customers using CD-R/CD-RW On handling Compact Discs CD/CD-R/CD-RWAbout media that can be played Protecting the USB connection terminalAccessory List Turning Power On and OffAdjusting Volume Setting TimePresetting Stations Manually Presetting Stations AutomaticallyTuning to Preset Stations RadioFolder Repeat Play MP3/WMA/AAC PlaybackRepeat Play X. Random Play Folder M.I.X. Random Play MP3/ WMA/AACScanning Programs Folder Scanning Programs MP3/WMA/ AACSupported playback sampling rates and bit rates ID3 tags/WMA tagsProducing MP3/WMA/AAC discs Media supportedSound Setting Adjusting Bass Level/Treble LevelEqualizer Presets Factory’s EQ Between Front and RearUsing the Front AUX Input Terminal Other FunctionsDisplaying the Text Displaying TimePress SOURCE/ to switch to the USB Audio mode Controlling USB memory OptionalPlaying MP3/WMA/AAC Files with the USB memory Optional USB Memory Connection OptionalInformation Case of DifficultyIndication for CD Player Indication for USB memory Specifications FM Radio SectionAM Radio Section CD Player SectionHave the Wiring and Installation Done by Experts USE Specified Accessory Parts and Install Them SecurelyDo not Install in Locations with High Moisture or Dust Do not Install in Locations Which Might HinderJapanese CAR InstallationRemove the mounting sleeve from the main unit see Removal Antenna To power antenna To amplifier Ignition Key ConnectionsSwitched Power Lead Ignition Red Battery Lead YellowAntenna Receptacle ANT Cont Lead Blue Ground Lead Black

CDE-100EUB, CDE-100E specifications

The Alpine CDE-100E and CDE-100EUB are cutting-edge car audio receivers that bring high-quality sound and impressive features to your in-car listening experience. Renowned for their reliability and innovation, Alpine has once again delivered products that cater to modern audio needs, providing drivers with the tools to enhance their journeys.

One of the standout features of the CDE-100E and CDE-100EUB is their superior audio quality. Both units are equipped with a powerful built-in amplifier that ensures clear and dynamic sound reproduction across various music genres. The units support multiple audio formats, including MP3, WMA, and AAC, allowing users to enjoy their favorite tracks without compromise.

Connectivity is another area where the CDE-100E and CDE-100EUB excel. The versatility of connections available with these models allows for seamless integration with smartphones and other digital devices. The CDE-100EUB, in particular, features a USB port that enables users to connect their devices directly for charging and music playback. Additionally, both models come with auxiliary inputs, making it easy to hook up external audio devices.

Furthermore, both receivers support Bluetooth connectivity, enabling hands-free calling and wireless audio streaming from smartphones. This feature not only enhances convenience but also promotes safer driving by allowing users to keep their hands on the wheel while managing calls and music playback.

Another impressive aspect of the CDE-100E and CDE-100EUB is the customizable equalizer settings. Users have the ability to tailor the sound profile according to their preferences, with multiple pre-set options and manual adjustments available. This level of personalization allows for a more immersive listening experience, accommodating various environments and audio preferences.

The sleek and modern design of both models enhances their appeal. The intuitive user interface features a clear LCD display that provides essential information at a glance, ensuring that drivers can operate the unit easily and safely while on the road. The stylish aesthetic further complements the interiors of contemporary vehicles.

Durability and reliability are hallmarks of the Alpine brand, and the CDE-100E and CDE-100EUB are no exceptions. Built with high-quality materials and advanced technology, these receivers are designed to withstand the rigors of everyday use, making them a smart investment for any car audio enthusiast.

In summary, the Alpine CDE-100E and CDE-100EUB combine advanced technology with user-friendly features. With superior audio quality, versatile connectivity options, Bluetooth capabilities, customizable equalizers, and a modern design, these receivers are engineered to provide an outstanding audio experience on the go, making them a top choice for those seeking to enhance their in-car entertainment.
Top Page Image Contents