Audiovox GM-250G BmCASSETTEDOOR, BnFAST-FORWARDBUTTONFF, BoREWINDBUTTONREW, BpPROGRAMSELECTOR

Page 4

normal conditions. In addition, the visibility of the numbers on the LCD may slightly decrease. The LCD read-out will return to normal when the tempera- ture increases to a normal range.

bmCASSETTEDOOR

Hold the cassette with the exposed tape edge to the right and insert into the cassette door. Depress fully until the cassette is engaged and begins playing. When the cassette reaches the end of the side of the tape being played, the unit will automatically change direction of play as shown by the arrow indication on the display panel and play of the other side of the cassete will begin.

NOTE: Observe cassette operation Cautions in Care and Maintenance section of this manual.

bnFAST-FORWARDBUTTON(FF)

Pushing the Fast-Forward button will cause the tape to move rapidly in the forward direction of play. To stop Fast-Forward movement, lightly push the Rewind Button bo until the Fast-Forward button disengages.

boREWINDBUTTON(REW)

Pushing the Rewind button will cause the tape to move rapidly in the reverse direction of play. To stop Rewind movement, lightly press the Fast-Forward button bn until the Rewind button disengages.

bpPROGRAMSELECTOR

To manually reverse tape direction and play the other side of a cassette, lightly press both the Fast-Forward bn and Rewind bo buttons at the same time. The change of direction will be shown by the arrows on the LCD panel.

bqEJECTBUTTON

Tape playback is stopped and the cassette is ejected by pressing this button, which also has the function of switching over to radio operation.

brMODESELECTOR

This button is used to select the audio source in play. During tape play, it can be used to change to radio play without ejecting the cassette. Similarly, it can then be used to go back to tape operation from radio play.

NOTE: To prevent damage to cassette tape and/or mechanism, it is recommended that the cassette be ejected if it will not be played for prolonged periods.

bs TIME/FREQUENCYSELECTOR(T/F)

During radio operation, push this button to call the time display on the incorporated quartz clock. Pressing the button again will return to frequency display.

During CD changer operation, push this button to call the time display or return to the disc and track number indications.

-3-

Image 4
Contents Ownersmanual Operating Instructions Radio and Cassette ControlsManual UP/DOWN Tuning Seek Tuning AUTO-STORE Tuning AS PRE-SET Scan Tuning PSFM/AM Band Selector Station PRE-SET MemoriesBmCASSETTEDOOR BnFAST-FORWARDBUTTONFFBoREWINDBUTTONREW BpPROGRAMSELECTORSetting the Clock BtRE-SETBUTTONCD Changer Controls DiscCr TRACK/DISC Repeat RPT Error SignsCsTRACK/DISCSHUFFLESHF Care and Maintenance Audiovox Corporation, Hauppauge, N.Y