Alpine MRP-F200, MRP-T130, MRP-F320 specifications English

Page 2

ENGLISH

Please read this OWNER'S MANUAL thoroughly to familiarize yourself with each control and function. We at ALPINE hope that your new MRP-F320/MRP-F200/MRP-T130 will give you many years of listening enjoyment.

In case of problems when installing your MRP-F320/MRP-F200/MRP-T130, please contact your authorized ALPINE dealer.

CAUTION: These controls are for tuning your system. Please consult your authorized Dealer for adjust- ment.

PRECAUTIONS

Perform the installation at a location that is level. Make sure the parking brake is on and the ignition is OFF.

Always disconnect the cable from the (–) negative pole of the battery before connecting or disconnecting the MRP-F320/MRP-F200/MRP-T130. This will prevent the possibility of short circuits.

When replacing a blown fuse make sure to replace it with one of the same value.

Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage to the vehicle's electrical system.

Be sure to connect the speaker (–) leads to the speaker (–) terminal. Never connect left and right channel speaker cables to each other or to the vehicle body.

This unit is designed for 12 VDC, negative ground systems. Make sure that your vehicle has this type of electrical system before connecting the power cable.

When making connections to the car's electrical system, be aware of the factory installed components (e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the MRP-F320/MRP-F200/MRP-T130 to the fuse box, make sure the fuse for the intended circuit of the MRP-F320/MRP-F200/MRP-T130 has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your ALPINE dealer.

The MRP-F320/MRP-F200/MRP-T130 uses female RCA-type jacks for connection to other units (e.g. amplifier) having RCA connectors. You may need an adaptor to connect other units. If so, please contact your authorized ALPINE dealer for assistance.

Due to the high power output of the MRP-F320/MRP-F200/MRP-T130, it is important that all connections are clean and well secured, or damage could result.

When installation and connections are completed, check the followings: a) Connections are proper. b) Operation of brake lamps, horn etc. are proper with the ignition ON. c) Operation of audio units is proper with the switch ON.

SERVICE CARE

IMPORTANT NOTICE

This Amplifier has been type tested and found to comply with the limits for a Class B computing device in accordance with the specifications in Subpart J of Part 15 of FCC Rules. This equipment generates and uses radio frequency energy, and it must be installed and used properly in accordance with the manufactur- er's instructions.

SERIAL NUMBER:

INSTALLATION DATE:

INSTALLATION TECHNICIAN:

PLACE OF PURCHASE:

IMPORTANT

Please record the serial number of your unit in the space provided here and keep it as a permanent record. The serial number plate is located on the rear of the unit.

Image 2
Contents MRP-F320 English Specifications Page MRP-F320 Connections Fig MRP-F320/MRP-F200 Avant Page

MRP-F200, MRP-F320, MRP-T130 specifications

The Alpine MRP-T130, MRP-F200, and MRP-F320 amplifiers are engineered to elevate the audio experience in automotive environments. Each model carries its unique specifications and features, catering to a range of user preferences and needs.

The Alpine MRP-T130 is a compact two-channel amplifier designed for those seeking powerful sound in a smaller footprint. With a power output of 50 watts RMS per channel at 4 ohms, it is perfect for driving coaxial or component speakers. The MRP-T130 utilizes Class D technology, which ensures higher efficiency and minimizes heat output, allowing for versatile installation even in tight spaces. Its low-pass crossover and flexible high-pass filter settings enable users to tailor sound output to their specific preferences, providing dynamic and clear audio reproduction. Additionally, the amplifier's durable design guarantees longevity, making it an excellent choice for car audio enthusiasts looking for reliability.

The MRP-F200 is a four-channel amplifier that offers versatility for multi-speaker setups. It delivers a robust 50 watts RMS per channel at 4 ohms, with an option for bridging to 100 watts RMS at 4 ohms for subwoofer configurations. This feature-rich amplifier is equipped with adjustable high-pass and low-pass filters, ensuring optimal sound quality whether driving full-range speakers or subwoofers. The MRP-F200's compact size makes it easy to install in various vehicles, allowing users to expand their audio systems without compromising on space. The thermal management system safeguards the amplifier from overheating, ensuring sustained performance during extended listening sessions.

The MRP-F320 takes performance to the next level with its exceptional power output and advanced features. This four-channel amplifier produces 80 watts RMS per channel at 4 ohms and can bridge to deliver 160 watts RMS to a subwoofer, making it ideal for car audio systems with increased power demands. The MRP-F320 boasts a variable high-pass and low-pass crossover, enabling seamless integration with any audio system configuration. Built with a robust chassis and top-notch components, it ensures minimal audio distortion and excellent clarity across all frequencies. Moreover, the amplifier includes speaker-level inputs, making it compatible with factory audio systems, providing an upgrade path for those looking to enhance their car's sound without replacing the head unit.

In summary, the Alpine MRP-T130, MRP-F200, and MRP-F320 amplifiers each offer distinctive features and capabilities, catering to different audio needs. Whether you seek a compact solution, a multi-channel experience, or high power output for demanding systems, Alpine's range ensures a superior auditory experience that meets various preferences and automotive requirements.